GETitDONE Posted November 23, 2008 Posted November 23, 2008 (edited) Burning a back up of game followed directiong by 1)copying layerbreak into sector box 2)Set booktype to DVD-ROM and Drive (For DVD+R DL Media) It has been stuck at 46% saying writing sectors with no changes, any thoughts as to what might be causing this, any help is greatly appreiciated I 22:17:47 ImgBurn Version 2.4.2.0 started! I 22:17:47 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 22:17:47 Total Physical Memory: 2,095,040 KB - Available: 958,968 KB I 22:17:47 Initialising SPTI... I 22:17:47 Searching for SCSI / ATAPI devices... I 22:17:47 Found 1 DVD Edited November 25, 2008 by GETitDONE
Cynthia Posted November 23, 2008 Posted November 23, 2008 Hi and welcome to the forum, GETitDONE! I 22:35:38 Write Speed: 2.4x These are the supported write speeds: I 22:35:38 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) I 22:35:38 Destination Device: [2:2:0] ATAPI iHAS120 6 7L02 (D:) (RAID) Sure that is the right setting in the BIOS? (SCSI) or (ATA) is the normal one.
GETitDONE Posted November 23, 2008 Author Posted November 23, 2008 (edited) Hi and welcome to the forum, GETitDONE! I 22:35:38 Write Speed: 2.4x These are the supported write speeds: I 22:35:38 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) I 22:35:38 Destination Device: [2:2:0] ATAPI iHAS120 6 7L02 (D:) (RAID) Sure that is the right setting in the BIOS? (SCSI) or (ATA) is the normal one. Thanks for the quick response, correct me please but what your saying is my burner cant write at lower than 4x, as far as bios goes..... your going to have to explain it like you would the birds and the bees to a youngen. I know how to get into bios, but what do I do from there, as far as changing dvice from RAID to sata (i'm guessing that what i'm supposed to do?)Thanks again! Edited November 23, 2008 by GETitDONE
LIGHTNING UK! Posted November 23, 2008 Posted November 23, 2008 It's probably under Integrated Peripherals. Whatever you have to change will no doubt have the word 'Controller' in it somewhere. Update the firmware on the drive too. Perhaps update so SP1 of Vista too.
GETitDONE Posted November 23, 2008 Author Posted November 23, 2008 It's probably under Integrated Peripherals. Whatever you have to change will no doubt have the word 'Controller' in it somewhere. Update the firmware on the drive too. Perhaps update so SP1 of Vista too. I downloaded frimware from liteon web site. 7L0E.exe when run it sounds like something is going on in the DVD drive but no app come up, is this normal?
LIGHTNING UK! Posted November 23, 2008 Posted November 23, 2008 Nope. You run the program and it'll located the drive + bring up a warning box telling you to remove and disc from the drive and click 'yes'. Then you hit the update button and let it do its thing. If you're not seeing that then make sure you've downloaded the file properly - that said, the RAR wouldn't extract if you hadn't. It could then be down to your drive showing up as 'RAID'. It might be blocking certain commands that the flasher uses, hence why you don't use optical drives on those types of controller.
GETitDONE Posted November 23, 2008 Author Posted November 23, 2008 (edited) Nope. You run the program and it'll located the drive + bring up a warning box telling you to remove and disc from the drive and click 'yes'. Then you hit the update button and let it do its thing. If you're not seeing that then make sure you've downloaded the file properly - that said, the RAR wouldn't extract if you hadn't. It could then be down to your drive showing up as 'RAID'. It might be blocking certain commands that the flasher uses, hence why you don't use optical drives on those types of controller. I disabled the Raid in bios and no change!! this is really frusterating any thoughts? I 05:34:40 ImgBurn Version 2.4.2.0 started! I 05:34:40 Microsoft Windows Vista Ultimate Edition (6.0, Build 6000) I 05:34:40 Total Physical Memory: 2,095,040 KB - Available: 1,254,816 KB I 05:34:40 Initialising SPTI... I 05:34:40 Searching for SCSI / ATAPI devices... I 05:34:41 Found 1 DVD Edited November 23, 2008 by GETitDONE
LIGHTNING UK! Posted November 23, 2008 Posted November 23, 2008 What controller do you have on your board? Look in device manager and tell us what it says under the IDE/ATA controller branch and also under the SCSI one. I see you haven't done Vista SP1 yet either.
GETitDONE Posted November 23, 2008 Author Posted November 23, 2008 by controller what do you mean? Sorry for the noobie status, And SP1 Is DL'ing slowly but surely.... IDE/ATA/ATAPI -ATA Channel 0 -ATA Cahnnel 1 -ULI M5229 PCI Bus Master IDE Controlller there is no SCSI tab however under the tab DVD/CD-ROM drives: -ATAPI iHAS120 6 SCSI CdRom Device -ULCJSDA KXERS56H516Z SCSI Cdrom Device
LIGHTNING UK! Posted November 23, 2008 Posted November 23, 2008 'Storage Controllers' then, sorry, MS renamed it.
GETitDONE Posted November 24, 2008 Author Posted November 24, 2008 'Storage Controllers' then, sorry, MS renamed it. NP here the Storage Controller AWXAMIL4 IDE Controller Microsoft iSCSI Initiator ULi SATA/RAID Controller (M1573)
LIGHTNING UK! Posted November 24, 2008 Posted November 24, 2008 Try some newer drivers. http://www.nvidia.com/page/uli_drivers.html
GETitDONE Posted December 2, 2008 Author Posted December 2, 2008 Try some newer drivers. http://www.nvidia.com/page/uli_drivers.html Got SP1 hell even fresh install of vista, here is the latest, thank you so much, I hope its getting closer to the problem, or a solution for that matter. I 12:17:27 ImgBurn Version 2.3.0.0 started! I 12:17:27 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 12:17:27 Total Physical Memory: 2,094,928 KB - Available: 1,334,152 KB I 12:17:27 Initialising SPTI... I 12:17:28 Searching for SCSI / ATAPI devices... I 12:17:33 Found 1 DVD
LIGHTNING UK! Posted December 2, 2008 Posted December 2, 2008 My guess is that it's timing out because the controller thinks it's running RAID. You wouldn't want command taking ages (5 seconds!) so it just cancels them when they do. Until you can get your controller / drivers thinking they're in SATA mode (rather than AHCI or RAID), you're stuck. If you can't do that, get yourself a Silicon Image 3512 PCI controller card off ebay for
mmalves Posted December 2, 2008 Posted December 2, 2008 I 12:17:27 ImgBurn Version 2.3.0.0 started! New everything and old ImgBurn? How's that possible? Anyway, please install the latest version
GETitDONE Posted December 3, 2008 Author Posted December 3, 2008 My guess is that it's timing out because the controller thinks it's running RAID. You wouldn't want command taking ages (5 seconds!) so it just cancels them when they do. Until you can get your controller / drivers thinking they're in SATA mode (rather than AHCI or RAID), you're stuck. If you can't do that, get yourself a Silicon Image 3512 PCI controller card off ebay for
Cynthia Posted December 3, 2008 Posted December 3, 2008 Look in the BIOS settings. It should normally be set to IDE.
cornholio7 Posted December 3, 2008 Posted December 3, 2008 there should be a raid enabled/disabled choice in the sata controller setup, maybe in advanced chipset on yours?
GETitDONE Posted December 3, 2008 Author Posted December 3, 2008 Look in the BIOS settings. It should normally be set to IDE. http://enthusiast.hardocp.com/article.html...Ghjb25zdW1lfQ== What are you referring to "it" Thanks
mmalves Posted December 3, 2008 Posted December 3, 2008 If that's the BIOS for your motherboard then you should make it look like this: http://enthusiast.hardocp.com/image.html?i...nFfMl81X2wuZ2lm (Integrated Peripherals -> South Configuration notice the Serial ATA RAID Mode is in disabled)
GETitDONE Posted December 4, 2008 Author Posted December 4, 2008 If that's the BIOS for your motherboard then you should make it look like this:http://enthusiast.hardocp.com/image.html?i...nFfMl81X2wuZ2lm (Integrated Peripherals -> South Configuration notice the Serial ATA RAID Mode is in disabled) ' If you look at my earlier post "I disabled the Raid in bios and no change!! this is really frusterating any thoughts?" thanks though thought it might be something else
Cynthia Posted December 4, 2008 Posted December 4, 2008 In this picture there is a setting 'On chip IDE setting' any mention about RAID in that sub menu? http://enthusiast.hardocp.com/image.html?i...DE2Mzcmc3Q9MCY=
GETitDONE Posted December 4, 2008 Author Posted December 4, 2008 (edited) In this picture there is a setting 'On chip IDE setting' any mention about RAID in that sub menu? http://enthusiast.hardocp.com/image.html?i...DE2Mzcmc3Q9MCY= Nothing.. Edited December 4, 2008 by GETitDONE
GETitDONE Posted December 6, 2008 Author Posted December 6, 2008 Does any on know of another forum that might be able to direct me on how to get this dvd drive working?
Recommended Posts