Apex2 Posted January 20, 2009 Posted January 20, 2009 Hi, Trying to write a (too?) large file, approx 7.6-8 Gb and was hoping to be given the option to write it to two regular DVD's. But I get: I/O error Failed to reserve track Invalid field in Parameter list Tried the FAQ and changed settings as described to manual 32K setting, no luck. Did a search but could not find anyone with the same issue. Is the error due to the too large file to fit on a regular DVD? (I used compusa DVD -R, I do not use dual layer) Is there there a work around? I do NOT know how to split up the file in two if needed... Thankful for any help! log: I 14:30:43 ImgBurn Version 2.4.2.0 started! I 14:30:43 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 14:30:43 Total Physical Memory: 523,696 KB - Available: 203,384 KB W 14:30:43 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 14:30:43 Drive E:\ (FAT32) does not support single files > 4 GB in size. I 14:30:43 Initialising SPTI... I 14:30:43 Searching for SCSI / ATAPI devices... I 14:30:43 Found 1 DVD
volvofl10 Posted January 21, 2009 Posted January 21, 2009 ImgBurn doesnt have the ability to 'split' a dual layer iso into 2 smaller files for 2 normal -R discs . you will have to do that by some other means. At 14.32.10 in the log file You accepted a warning that the media was to small for the file you wanted to burn ie; you used a DV5 blank to do a DV9 project . thats why it failed
Apex2 Posted January 21, 2009 Author Posted January 21, 2009 ImgBurn doesnt have the ability to 'split' a dual layer iso into 2 smaller files for 2 normal -R discs .you will have to do that by some other means. At 14.32.10 in the log file You accepted a warning that the media was to small for the file you wanted to burn ie; you used a DV5 blank to do a DV9 project . thats why it failed Thank you for info "the Stig"? ( I am a gearhead / racer and love the show Top Gear, also happen to have a couple of Volvos btw.. ) I found a way to split the files in half and make two individual new images, tried on the first one with a VRIFY session and it was all good. Then went to actual write and it failed at 98% complete with the same sectors failing as in my initial tries with one big file...Do I have bad files to begin with? Or are there files missing in my attempt to split the file in two? Thanks Please see the log for both verify and write sessions below: ; //****************************************\\ ; ImgBurn Version 2.4.2.0 - Log ; Tuesday, 20 January 2009, 20:34:50 ; \\****************************************// ; ; I 19:56:15 ImgBurn Version 2.4.2.0 started! I 19:56:15 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 19:56:15 Total Physical Memory: 523,696 KB - Available: 161,940 KB W 19:56:15 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 19:56:15 Drive E:\ (FAT32) does not support single files > 4 GB in size. I 19:56:15 Initialising SPTI... I 19:56:15 Searching for SCSI / ATAPI devices... I 19:56:15 Found 1 DVD
LIGHTNING UK! Posted January 21, 2009 Posted January 21, 2009 You're just using cheapo media and the drive is failing to write to it. Invest in some decent stuff (Verbatim or Taiyo Yuden) and you should be ok.
mmalves Posted January 21, 2009 Posted January 21, 2009 I 19:57:34 Destination Device: [1:1:0] BENQ DVD LS DW1655 BCGB (F:) (ATA) There's firmware BCIB available for your burner. Remove any disc and close the tray before updating. Reboot after it has finished.
Apex2 Posted January 22, 2009 Author Posted January 22, 2009 I 19:57:34 Destination Device: [1:1:0] BENQ DVD LS DW1655 BCGB (F:) (ATA) There's firmware BCIB available for your burner. Remove any disc and close the tray before updating. Reboot after it has finished. Thanks UKLIGHTNING on media suggestions, note taken. Thanks MMalves on the firmware link, did the update and voila it created the DVD! It seems to play OK in the TV DVD recorder - but the funny thing is my computer does not see the DVD after it is burned - no media present..not sure why it sees a blank and all other discs. I also burned part two on a DVD and the burn worked, but it will not play on the TV DVD Rec/player, some files are probably missing in the part two image - have to expirment to see what is missing and re-do a image for part two. Same went for this part two disc, my computer did not see it in the drive. Anyone have any idea why DVD 1 can play fine in my TV/DVD but not seen at all by my computer's DVD drive? Thanks I inlcuded logs: ImgBurn Version 2.4.2.0 - Log ; Wednesday, 21 January 2009, 19:06:41 ; \\****************************************// ; ; I 18:34:31 ImgBurn Version 2.4.2.0 started! I 18:34:31 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 18:34:31 Total Physical Memory: 523,696 KB - Available: 123,740 KB W 18:34:31 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 18:34:31 Drive E:\ (FAT32) does not support single files > 4 GB in size. I 18:34:31 Initialising SPTI... I 18:34:31 Searching for SCSI / ATAPI devices... I 18:34:31 Found 1 DVD
LIGHTNING UK! Posted January 22, 2009 Posted January 22, 2009 If you look at your write speed (MAX which equals 16x according to the write descriptors) and then compare that to what your drive actually achieved you'll see that it's WAYYYY down on what it should be. That means there's still an issue somewhere. Make sure you Verify your burns - this is even more important when you know you're having issues. After that it's just a case of taking my advice and investing in some decent discs. Princo are useless.
Recommended Posts