jr2647 Posted January 21, 2009 Share Posted January 21, 2009 For some reason when I start ImgBurn it now gets stuck on the searching for scsi adapters... I am running Vista and have not had a problem until lately. I am including my log below: I 13:55:20 ImgBurn Version 2.4.2.0 started! I 13:55:20 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 13:55:20 Total Physical Memory: 3,142,684 KB - Available: 2,104,044 KB W 13:55:20 Drive J:\ (FAT32) does not support single files > 4 GB in size. W 13:55:20 Drive L:\ (FAT32) does not support single files > 4 GB in size. W 13:55:20 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! W 13:55:20 I/O Interface 'Debug Mode' Enabled! I 13:55:20 Initialising SPTI... I 13:55:20 Searching for SCSI / ATAPI devices... I 13:55:20 Initialising Device (\\.\CdRom0)... I 13:55:20 Device Address: [0:1:0] I 13:55:20 Drive Letter: (D:) I 13:55:20 Device Maximum Transfer Length: 131,072 I 13:55:20 Device Maximum Physical Pages: 33 I 13:55:20 Device Alignment Mask: 1 I 13:55:20 Device Bus Type (Adapter/Device): ATAPI / ATAPI I 13:55:20 [0:1:0] (D:) (ATAPI) I 13:55:20 CDB: 12 00 00 00 60 00 I 13:55:20 CDB Interpretation: Inquiry Any help is appreciated. I am using an LG Blu Ray Burner. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 21, 2009 Share Posted January 21, 2009 What have you installed / changed that could have caused it? I/O normally gets stuck due to bad controller / filter drivers. What make of controller is the drive actually connected to? If you don't know that, perhaps you know what make/model motherboard you have or what chipset it uses? How many optical drives (including virtual ones) do you have in your machine? I see that one thinks it's a slave drive so I'm guessing it's an IDE one? Link to comment Share on other sites More sharing options...
jr2647 Posted January 22, 2009 Author Share Posted January 22, 2009 (edited) What have you installed / changed that could have caused it? I/O normally gets stuck due to bad controller / filter drivers. What make of controller is the drive actually connected to? If you don't know that, perhaps you know what make/model motherboard you have or what chipset it uses? How many optical drives (including virtual ones) do you have in your machine? I see that one thinks it's a slave drive so I'm guessing it's an IDE one? I have 4 USB external Hard Drives as I use this as a media server. I also have internal DVD burner as well as my internal LG BD burner. Intel P965/G965 I beleive is my chipset. A SATA raid controller is what my LG blu Ray burner is plugged into and not sure about the other DVD burner. I can't hink of any thing I have added but maybe my last external HDD. I have a Dell XPS 410. Edited January 22, 2009 by jr2647 Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 22, 2009 Share Posted January 22, 2009 Is the drive on a 3rd party (plugin - i.e. pci / pcie) sata raid controller or just the intel ich8 controller? What 'mode' is the controller running in? (this is normally set in the bios) You want to make sure it's in standard / ata mode and not ahci or raid. Link to comment Share on other sites More sharing options...
jr2647 Posted January 23, 2009 Author Share Posted January 23, 2009 Is the drive on a 3rd party (plugin - i.e. pci / pcie) sata raid controller or just the intel ich8 controller? What 'mode' is the controller running in? (this is normally set in the bios) You want to make sure it's in standard / ata mode and not ahci or raid. I don't have a PCI SATA card it is working right off the motherboard SATA plugin. I am not sure how to change the controller from RAD to standard as when I access the BIOS it looks like the only choices are on or off on the SATA drive Iam looking at. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted January 23, 2009 Share Posted January 23, 2009 What do you see under the ide/atapi controller branch in device manager? How about the scsi / raid controller one? See if you can get us a screenshot with both of those branches expanded and visible. The bios option would be for the controller itself rather than a drive. Being a Dell, they might have hidden all that stuff from you. Try installing the latest chipset and matrix drivers from the intel site. http://www.intel.com/support/chipsets/inf/ http://support.intel.com/support/chipsets/imsm/ Link to comment Share on other sites More sharing options...
Recommended Posts