DJ Matt Posted January 29, 2009 Posted January 29, 2009 I never have had a problem burning dual layer DVD's up until the past couple of weeks. I have been using Memorex DVD+R DL discs. Of course, Verbatim discs are the best, but I have never had a problem with Memorex before. It seems like my burners fail at 50% every time with ImgBurn. I used Nero as well and the disc burned 100%, but it still says it was a failed burn. Here is an image of the error I am having. I have posted a log below as well. Any help would be appreciated. Error Image - http://i43.tinypic.com/11kv8r6.jpg UDF compilation 4:37:46 AM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 4:37:46 AM #2 Text 0 File Isodoc.cpp, Line 6789 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : manual UDF Revision : 2.50 UDF Partition Type : physical 4:37:47 AM #3 Text 0 File Burncd.cpp, Line 3563 Turn on Disc-At-Once, using DVD media 4:37:47 AM #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142 FS Settings: using validator 'CUDFSettingsValidatorDVD' ParamMode = 'manual', changing UDF partition type from 'physical' to 'physical' Changing UDF revision from '2.50' to '2.50' 4:37:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 1858 You are burning a disc in UDF version 2.5 or higher. Therefore, the disc may not be accessible in every operating system. 4:37:47 AM #6 Text 0 File FilesystemSettingsValidator.cpp, Line 142 FS Settings: using validator 'CUDFSettingsValidatorDVD' ParamMode = 'manual', changing UDF partition type from 'physical' to 'physical' Changing UDF revision from '2.50' to '2.50' 4:37:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 1858 You are burning a disc in UDF version 2.5 or higher. Therefore, the disc may not be accessible in every operating system. 4:37:57 AM #8 Text 0 File DlgWaitCD.cpp, Line 312 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3983119 (885:08.19, 7779MB) 4:37:57 AM #9 Text 0 File DlgWaitCD.cpp, Line 324 Write in overburning mode: NO (enabled: CD) 4:37:57 AM #10 Text 0 File DlgWaitCD.cpp, Line 2951 Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD+R DL 4:37:57 AM #11 Text 0 File DlgWaitCD.cpp, Line 499 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: DVD+R DL. Medium required by compilation: DVD R/RW, DVD+R DL.) 4:37:57 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 756 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 3983120 (3983120) = #3983120/885:8.20 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3983120 blocks [D: _NEC DVD+-RW ND-6650A] -------------------------------------------------------------- 4:38:27 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 958 Prepare [D: _NEC DVD+-RW ND-6650A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8157429760, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 3983120 | 0 | 0x00 3983120 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 4:38:27 AM #14 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 4:38:27 AM #15 Text 0 File Burncd.cpp, Line 4362 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 4:38:27 AM #16 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 4:38:27 AM #17 Text 0 File Burncd.cpp, Line 4484 Cache writing successful. 4:38:27 AM #18 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 4:38:27 AM #19 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 2.4x (3,324 KB/s) 4:38:27 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2675 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:38:27 AM #21 Text 0 File DVDPlusDualLayer.cpp, Line 1856 GetDriveCaps: LAST LBA of layer 1 is 0 4:38:27 AM #22 Text 0 File DVDPlusDualLayer.cpp, Line 768 L0 Data Zone Capacity not set. Max LBA L0 2086911 (1FD7FFh, 4075MB), next writable address 0 (0h, 0MB) 4:38:27 AM #23 CDR -1205 File DVDPlusDualLayer.cpp, Line 784 Burning Layer 1 4:38:27 AM #24 Text 0 File DVDPlusDualLayer.cpp, Line 794 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 4:38:27 AM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x07e20140: Len x804 4:38:28 AM #26 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: No 4:38:28 AM #27 Text 0 File ThreadedTransfer.cpp, Line 273 Pipe memory size 73340800 4:38:28 AM #28 Text 0 File CUDFTransferItem2.cpp, Line 660 GenUDF2 FS Layout: =-=-=-=-=-=-=-=-=-=- Sectors to be written: 3983120 Session Start: Sector 0 Volume Structure: Sector [0, 271] (272 Sectors) Before Meta Data: Sector [272, 287] (16 Sectors) Meta Data: Sector [288, 319] (32 Sectors) Data: Sector [320, 3982789] (3982470 Sectors) After Data: Sector [3982790, 3982831] (42 Sectors) Trailer Track: Sector [3982832, 3983119] (288 Sectors) GenUDF2 Parameters: =-=-=-=-=-=-=-=-=-=- PrepTime: 01-25-2009 04:37:56 UDF Revision: 2.50 UDF Partition Type: Physical UDF Special Mode: None Bytes per Sector: 2048 Session Start: 0 Physical Partition Start: -1 Total Capacity: 4173824 Multi Session Mode: Begin Disc Type: DVD+R DL OS Class: 5 Volume ID: Eden Lake Allow Unicode Labels: 0 Duplicate Meta Data: 1 MS Info File: 04959AE8 VMS Rollback File: 00000000 Create ISO bridge: 0 ECC Block Length: 16 Sparing Packet Length: 16 Allocation Unit Size: 32 Alignment Unit Size: 16 Make Writable: 0 Access Type: Read-only 5:00:03 AM #29 CDR -1206 File DVDPlusDualLayer.cpp, Line 2154 Burning Layer 2 5:00:03 AM #30 Text 0 File DVDPlusDualLayer.cpp, Line 2163 Perform layer 1 to 2 jump before writing at address 2086912 (1FD800h) 5:00:39 AM #31 SPTI -1135 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) CDB Data: 0x2A 00 00 1F DF 60 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x0b8b6c00: Len x10000 0xCC B7 D3 EB 6C 13 4A 7D BD 0F 8C 80 7A 9A 7C F2 0xFC 24 FB DB 88 24 31 A8 30 D8 9C 5D 61 76 86 51 0xA7 83 C7 A5 7D 47 67 B7 51 1E 44 59 CE C0 C2 54 5:00:39 AM #32 CDR -1135 File Writer.cpp, Line 306 Write error D: _NEC DVD+-RW ND-6650A 5:00:40 AM #33 SPTI -1135 File SCSIPassThrough.cpp, Line 215 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 5:00:40 AM #34 Text 0 File DVDPlusRW.cpp, Line 943 EndDAO: Last written address 2088800 5:00:41 AM #35 Text 0 File DVDPlusDualLayer.cpp, Line 1424 SetDriveCaps: Set LAST LBA of layer 1 to 0 5:00:42 AM #36 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 2.4x (3,324 KB/s) 5:00:42 AM #37 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:00:45 AM #38 Text 0 File Cdrdrv.cpp, Line 11444 DriveLocker: UnLockVolume completed 5:00:45 AM #39 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
LIGHTNING UK! Posted January 29, 2009 Posted January 29, 2009 Where's the ImgBurn log?! Post ImgBurn logs on the ImgBurn forum please, keep your Nero ones for their own support team. So anyway.... 5:00:39 AM #31 SPTI -1135 File SCSIPassThrough.cpp, Line 215CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) CDB Data: 0x2A 00 00 1F DF 60 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x0b8b6c00: Len x10000 0xCC B7 D3 EB 6C 13 4A 7D BD 0F 8C 80 7A 9A 7C F2 0xFC 24 FB DB 88 24 31 A8 30 D8 9C 5D 61 76 86 51 0xA7 83 C7 A5 7D 47 67 B7 51 1E 44 59 CE C0 C2 54 5:00:39 AM #32 CDR -1135 File Writer.cpp, Line 306 Write error D: _NEC DVD+-RW ND-6650A 5:00:40 AM #34 Text 0 File DVDPlusRW.cpp, Line 943 EndDAO: Last written address 2088800 Your drive bombed out with a 'Write Error' That happened at sector 2088800 which is about 50% on the disc I expect... exactly the same place you said ImgBurn reported an error. So basically, give up with the memorex discs and buy Verbatims. Once you've done that, if they still fail, try cleaning your drive. If it STILL doesn't work, buy a new drive.
DJ Matt Posted January 29, 2009 Author Posted January 29, 2009 I guess I will try the Verbatim discs then. I just never have had a problem with Memorex before. Maybe its just a bad batch of discs. I can burn single layer discs fine. I burned one the other day and it was Sony DVD+R disc. I failed to mention one other thing. I was by my laptop when it hit 50% for the writing process. At that time the burner made a funny noise. It sounded like the disc was shifting in a rough way. Either that or it was the laser.
blutach Posted January 30, 2009 Posted January 30, 2009 When Ner0 start paying us to help with THEIR crappy problems, we'll help. Geez! Regards
spinningwheel Posted January 30, 2009 Posted January 30, 2009 I guess I will try the Verbatim discs then. Wise choice...
Recommended Posts