willryan42 Posted March 16, 2009 Posted March 16, 2009 So lately I've been using osx360 to burn my games. I haven't burned one in a couple weeks, but when I did it yesterday, it burned fine, but when i put it into my xbox, it doesn't play. No error message, just tries to read it, makes some weird noises and then goes to the dashboard. I also tried burning in iburn360 and the same noises happen and then to the dashboard. Then I went to imgburn. I've burned over 40 games with imgburn under parallels desktop without a hiccup, even though I've been using memorex dl discs. But this time, I get a few errors. First "failed to set L0 data zone capacity! reason: medium not present" then same L0 error with "reason: power on, reset, or bus device reset occurred" then "reason: invalid field in parameter list" I 22:23:20 Operation Started! I 22:23:20 Source File: \\.PSF\.Home\Downloads\xxx-sto.iso I 22:23:20 Source File Sectors: 3,825,924 (MODE1/2048) I 22:23:20 Source File Size: 7,835,492,352 bytes I 22:23:20 Source File Volume Identifier: XGD2DVD_NTSC I 22:23:20 Source File Volume Set Identifier: 34672923 I 22:23:20 Source File Implementation Identifier: Sonic Scenarist 3.1 I 22:23:20 Source File File System(s): ISO9660, UDF (1.02) I 22:23:20 Destination Device: [0:1:0] HL-DT-ST DVDRW GSA-S10N BP10 (D:) (ATA) I 22:23:20 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 22:23:20 Destination Media Sectors: 4,173,824 I 22:23:20 Write Mode: DVD I 22:23:20 Write Type: DAO I 22:23:20 Write Speed: 2.4x I 22:23:20 Link Size: Auto I 22:23:20 Test Mode: No I 22:23:20 OPC: No I 22:23:20 BURN-Proof: Enabled I 22:23:20 Book Type Setting: N/A I 22:23:20 User Specified L0 Data Zone Capacity: 1,913,760 E 22:32:04 Failed to set L0 Data Zone Capacity! E 22:32:04 Reason: Invalid Field in Parameter List E 22:32:04 Operation Failed! - Duration: 00:08:44 I 22:32:04 Average Write Rate: N/A - Maximum Write Rate: N/A Is it possible that I have some bad DL discs? I know everyone here is verbatim crazy, but I have a 50 pack of these memorex's and I've never had a problem with them before. Also, I have a toshiba laptop and the games burn fine in imgburn on there. Could it be something with my drive on the macbook? It's pretty new, and cd's and dvd's still burn fine, just trouble with DL's.
LIGHTNING UK! Posted March 16, 2009 Posted March 16, 2009 Every drive is different, some handle crappy DL media better than others. If you try and burn that disc again, the LB has probably been moved so just ignore the error when it fails with that 'invalid field in parameter list' message.
willryan42 Posted March 16, 2009 Author Posted March 16, 2009 You mean just click "continue"? I've tried that and then it burns, but then ends up not working just like the others. =/
willryan42 Posted March 16, 2009 Author Posted March 16, 2009 I've tried both 2.4 and 4x. Here's a log of when I just continue pass the errors: I 22:43:04 Operation Started! I 22:43:04 Source File: \\.PSF\.Home\Downloads\xxx-sto.iso I 22:43:04 Source File Sectors: 3,825,924 (MODE1/2048) I 22:43:04 Source File Size: 7,835,492,352 bytes I 22:43:04 Source File Volume Identifier: XGD2DVD_NTSC I 22:43:04 Source File Volume Set Identifier: 34672923 I 22:43:04 Source File Implementation Identifier: Sonic Scenarist 3.1 I 22:43:04 Source File File System(s): ISO9660, UDF (1.02) I 22:43:04 Destination Device: [0:1:0] HL-DT-ST DVDRW GSA-S10N BP10 (D:) (ATA) I 22:43:04 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 22:43:04 Destination Media Sectors: 4,173,824 I 22:43:04 Write Mode: DVD I 22:43:04 Write Type: DAO I 22:43:04 Write Speed: 2.4x I 22:43:04 Link Size: Auto I 22:43:04 Test Mode: No I 22:43:04 OPC: No I 22:43:04 BURN-Proof: Enabled I 22:43:04 Book Type Setting: N/A I 22:43:04 User Specified L0 Data Zone Capacity: 1,913,760 W 22:44:16 Failed to set L0 Data Zone Capacity! W 22:44:16 Reason: Medium Not Present I 22:44:27 Filling Buffer... (20 MB) I 22:44:28 Writing LeadIn... I 22:44:37 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 22:44:37 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 22:44:37 Writing Layer 0... (LBA: 0 - 2086911) I 22:45:29 Abort Request Acknowledged I 22:45:29 Synchronising Cache... W 22:45:32 User opted to skip the 'Close Track/Session/Disc' functions. E 22:45:32 Failed to Write Image! I 22:45:32 Exporting Graph Data... I 22:45:32 Graph Data File: C:\Documents and Settings\Administrator\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRW_GSA-S10N_BP10_MONDAY-MARCH-16-2009_10-43_PM_RITEK-S04-66_2.4x.ibg I 22:45:32 Export Successfully Completed! E 22:45:32 Operation Aborted! - Duration: 00:02:27
LIGHTNING UK! Posted March 16, 2009 Posted March 16, 2009 Can you please copy + paste the disc info from the panel on the right when you're in Read mode with that disc in the drive... thanks! Oh and because of this thread (and a suggestion made by a beta team member a while back!) I've added code to log the error codes on all the 'retries' you (the user) perform when the program is trying to set the layer break position. Obviously some important ones are missing from the log here because 'medium not present' is a really weird one to run into mid way through doing something - so it probably followed a bus reset - which you mentioned in your initial post but wasn't logged anywhere.
willryan42 Posted March 17, 2009 Author Posted March 17, 2009 heres the disc info: HL-DT-ST DVDRW GSA-S10N BP10 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Disc Control Blocks Information: HL-DT-ST GSA-S10N Physical Format Information (Last Recorded - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 and i dont know about the log, i copied everything that's there, unless theres some setting i need to change?
mmalves Posted March 17, 2009 Posted March 17, 2009 Can you please post that information from the Write mode too? Your log shows the burn being aborted less than a minute after being started, so that disc was probably damaged in the aborted burn.
willryan42 Posted March 17, 2009 Author Posted March 17, 2009 Here's the log from the write mode with a new disc: HL-DT-ST DVDRW GSA-S10N BP10 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Supported Write Speeds: 2.4x, 4x DVD
mmalves Posted March 17, 2009 Posted March 17, 2009 If it doesn't work at the 2.4x and 4x available speeds then I guess you should try with Verbatim 2.4x (MKM-001-00 dye) blanks, as they work best on most burners.
willryan42 Posted March 17, 2009 Author Posted March 17, 2009 Thanks for your help! I'm going to pick up a few verbatim's tomorrow and test it out. Dual layer disc's seem to be different than regular blank cd's and dvd's am I right? For example, with just cd-r's and dvd-r's, I can use any brand at all with no problems. But i obviously have problems with certain brands of DL discs. Normal?
Cynthia Posted March 17, 2009 Posted March 17, 2009 Yes, normal. Older burners have very often problems with newer high speeds (8x) DL media.
willryan42 Posted March 17, 2009 Author Posted March 17, 2009 Same thing happens with verbatim 2.4x discs! =/
willryan42 Posted March 18, 2009 Author Posted March 18, 2009 Okay one second. And how do I post the full log? Am I missing some setting, because I'm copying everything from the log window.
mmalves Posted March 18, 2009 Posted March 18, 2009 You can find the logs in Help menu -> ImgBurn Logs
LIGHTNING UK! Posted March 18, 2009 Posted March 18, 2009 We don't want the FULL, full log, just the entire session's worth where you burnt + verified a Verbatim disc.
willryan42 Posted March 19, 2009 Author Posted March 19, 2009 I 13:54:16 ImgBurn Version 2.4.2.0 started! I 13:54:16 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 13:54:16 Total Physical Memory: 523,828 KB - Available: 386,452 KB I 13:54:16 Initialising SPTI... I 13:54:16 Searching for SCSI / ATAPI devices... I 13:54:16 Found 1 DVD
Cynthia Posted March 19, 2009 Posted March 19, 2009 Do you know if the computer has nvidia based chipset?
willryan42 Posted March 19, 2009 Author Posted March 19, 2009 No clue, I just know it's a macbook, early 2008. Not the aluminum unibody ones.
Cynthia Posted March 19, 2009 Posted March 19, 2009 Dumb question as I know nothing about todays Mac's. Over fifteen years since I owned one. Do you run ImgBurn through some windows emulator software or is Windows just installed on this computer as on any ordinary (real) Windows computer?
willryan42 Posted March 19, 2009 Author Posted March 19, 2009 I run it through Parallels desktop, which yes, is an emulator. And I can't see this being a problem, because I've burned countless number of dual layers under parallels with this computer, then I stopped for a month or so and when i tried again, I'm greeted by this mess =/
mmalves Posted March 19, 2009 Posted March 19, 2009 What happens if you switch the interface to ASPI in ImgBurn's settings (I/O tab)?
willryan42 Posted March 19, 2009 Author Posted March 19, 2009 Apparently that didn't work: W 04:39:21 I/O Interface has been changed! I 04:39:21 Shutting down SPTI... I 04:39:21 Initialising ASPI... E 04:39:21 Unable to initialise ASPI! - WNASPI32.DLL E 04:39:21 Reason: The specified module could not be found. E 04:39:21 You need to install an ASPI manager. E 04:39:21 Visit http://www.imgburn.com to download one. E 04:39:21 Alternatively, try changing the 'I/O Interface' in the Settings to a different one.
mmalves Posted March 19, 2009 Posted March 19, 2009 Decompress the attached file to ImgBurn's folder and try again with ASPI interface.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now