thekilladon Posted April 16, 2009 Share Posted April 16, 2009 I was trying to burn a game. 18:44:59 ImgBurn Version 2.4.4.0 started! I 18:44:59 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 1) I 18:44:59 Total Physical Memory: 1,047,340 KB - Available: 773,916 KB I 18:44:59 Initialising SPTI... I 18:44:59 Searching for SCSI / ATAPI devices... I 18:44:59 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted April 16, 2009 Share Posted April 16, 2009 I 18:47:42 Destination Device: [3:0:0] HL-DT-ST DVD-RAM GSA-H54N 1.00 (E:) (ATA)I 18:47:42 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x) I 18:47:42 Write Speed: 2x It means the drive wasn't able to write to that disc. Update the firmware (remove any disc and close the tray before doing so), reboot the computer and try again with a brand new blank disc. If it still doesn't work, try the other supported write speeds. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 16, 2009 Share Posted April 16, 2009 Seriously, SP1?! Update Windows to SP3 Update your drives firmware to 1.03 - http://www.firmwarehq.com/LG/GSA-H54N/files.html Burn faster. Those are 8x discs and your drive probably likes burning them faster rather than slower - that's why it can even overspeed them to 10x. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 16, 2009 Share Posted April 16, 2009 lol Link to comment Share on other sites More sharing options...
thekilladon Posted April 22, 2009 Author Share Posted April 22, 2009 It is still not working. I am able to burn DVD-R and CD's with ease but I cant burn with Dual DVD+R. I am using Verbatim and even tried using nero and tried to burn as data file. Is it possible that my burner cant burn on dual dvdr's?. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted April 22, 2009 Share Posted April 22, 2009 Post the log from your most recent burning session. Link to comment Share on other sites More sharing options...
eSkRo Posted April 22, 2009 Share Posted April 22, 2009 (edited) have you updated to Windows SP3 & firmware to 1.03? Edited April 22, 2009 by eSkRo Link to comment Share on other sites More sharing options...
thekilladon Posted April 24, 2009 Author Share Posted April 24, 2009 I 13:45:47 ImgBurn Version 2.4.4.0 started! I 13:45:47 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 13:45:47 Total Physical Memory: 1,047,340 KB - Available: 792,776 KB I 13:45:47 Initialising SPTI... I 13:45:47 Searching for SCSI / ATAPI devices... I 13:45:47 Found 1 DVD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
thekilladon Posted April 24, 2009 Author Share Posted April 24, 2009 Yes i have already updated. Still no luck. Link to comment Share on other sites More sharing options...
mmalves Posted April 24, 2009 Share Posted April 24, 2009 Have you tried burning at 6x or 8x? If they don't work then you should try with Verbatim 2.4x (MKM-001-00 dye) Made in Singapore blanks. Link to comment Share on other sites More sharing options...
thekilladon Posted April 24, 2009 Author Share Posted April 24, 2009 Yes, i have tried those speeds. Link to comment Share on other sites More sharing options...
mmalves Posted April 24, 2009 Share Posted April 24, 2009 You may also want to try a lens cleaning disc on your burner. Link to comment Share on other sites More sharing options...
Recommended Posts