Jump to content

ImgBurn Support Forum uses cookies. Read the Privacy Policy for more info. To remove this message, please click the button to the right:    I accept the use of cookies

Photo

Bad media or Wrong settings?


Forum Rules

Read the Guides forum if you don't know how to do something. :readbook:
If you have a question or a problem, check the FAQ and use the Search to see if you can find the answer for yourself. :lightbulb:
If you're having trouble burning double layer media, read Here.
Still stuck? Create a new thread and describe your issue in detail.
Make sure you include a copy of the program's log in your post. No log = :chair:


  • Please log in to reply
7 replies to this topic

#1 Rusty4683

Rusty4683

    ISF Newbie

  • Members
  • Pip
  • 7 posts
  • Location:IN

Posted 12 March 2017 - 06:48 AM

Last time I needed help my blu ray back ups would play but then freeze and either audio or picture would continue (one without the other) or it would freeze as if a brand new discussion had a scratch. I used Img burn to create the isos and know they are without flaw. Before it was suggested my older LG burner was at fault so I'm back with the same issues and a brand new pioneer burner. It seems like everything burns okay up until verify gets to 50 percent and then it's just read error after read error. Right now I'm verifying a burn at 56% with 183 errors. Are there settings I need to change to burn blu rays from isos without flaw (I've all ready limited the speed)... Or is it because my Ridata blu rays are garbage (I've seen many negative things about their product after buying them of course). Any help is appreciated and if it is my media is verbatim fairly trustworthy?

#2 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,024 posts
  • Gender:Male
  • Location:United Kingdom

Posted 12 March 2017 - 06:57 AM

Please post the log - as per the pink box up the top.

You don't need to change any settings, the default work just fine.

If your drive is producing bad burns, it'll probably be due to the media you're using... but other things like firmware and write speed can also come into it.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#3 Rusty4683

Rusty4683

    ISF Newbie

  • Members
  • Pip
  • 7 posts
  • Location:IN

Posted 13 March 2017 - 06:11 AM

W 12:31:14 Sector 12222839 maps to File: \BDMV\STREAM\00800.m2ts
W 12:31:19 Failed to Read Sector 12222840 - Reason: L-EC Uncorrectable Error
W 12:31:19 Sector 12222840 maps to File: \BDMV\STREAM\00800.m2ts
W 12:31:23 Failed to Read Sector 12222841 - Reason: L-EC Uncorrectable Error
W 12:31:23 Sector 12222841 maps to File: \BDMV\STREAM\00800.m2ts
W 12:31:28 Failed to Read Sector 12222842 - Reason: L-EC Uncorrectable Error
W 12:31:28 Sector 12222842 maps to File: \BDMV\STREAM\00800.m2ts
W 12:31:32 Failed to Read Sector 12222843 - Reason: L-EC Uncorrectable Error
W 12:31:32 Sector 12222843 maps to File: \BDMV\STREAM\00800.m2ts
W 12:31:37 Failed to Read Sector 12222844 - Reason: L-EC Uncorrectable Error
W 12:31:37 Sector 12222844 maps to File: \BDMV\STREAM\00800.m2ts
W 12:31:42 Failed to Read Sector 12222845 - Reason: L-EC Uncorrectable Error
W 12:31:42 Sector 12222845 maps to File: \BDMV\STREAM\00800.m2ts
This is the highest part of the log file it continues on until now. I was going to post it all, but it didn't like that. Although it said my post was too short.



#4 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,024 posts
  • Gender:Male
  • Location:United Kingdom

Posted 13 March 2017 - 07:40 AM

It's actually the first bit I was after.

You should be able to copy and paste everything up until where it starts hitting all the read errors.

Failing that, attach the actual log file itself.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#5 Rusty4683

Rusty4683

    ISF Newbie

  • Members
  • Pip
  • 7 posts
  • Location:IN

Posted 13 March 2017 - 12:13 PM

I 01:14:04 ImgBurn Version 2.5.8.0 started!
I 01:14:04 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 01:14:04 Total Physical Memory: 12,564,024 KiB  -  Available: 10,908,400 KiB
W 01:14:04 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 01:14:04 Initialising SPTI...
I 01:14:04 Searching for SCSI / ATAPI devices...
I 01:14:04 -> Drive 1 - Info: DiscSoft Virtual 1.0 (G:) (Virtual)
I 01:14:04 -> Drive 2 - Info: DiscSoft Virtual 1.0 (H:) (Virtual)
I 01:14:04 -> Drive 3 - Info: HL-DT-ST BD-RE  WH14NS40 1.00-A4 (D:) (ATA)
I 01:14:05 -> Drive 4 - Info: PIONEER BD-RW   BDR-209D 1.34-ID61 (E:) (ATA)
I 01:14:05 Found 2 BD-ROM XLs, 1 BD-RE and 1 BD-RE XL!
I 01:14:42 Operation Started!
I 01:14:42 Building Image Tree...
I 01:14:52 Corrected file system selection for Blu-ray Video disc.
I 01:14:52 Corrected UDF revision selection for Blu-ray Video disc.
I 01:15:08 Calculating Totals...
I 01:15:08 Preparing Image...
I 01:15:09 Contents: 1,356 Files, 20 Folders
I 01:15:09 Content Type: BD Video
I 01:15:09 Data Type: MODE1/2048
I 01:15:09 File System(s): UDF (2.50)
I 01:15:09 Volume Label: Moana
I 01:15:09 Size: 44,020,556,031 bytes
I 01:15:09 Sectors: 21,495,393
I 01:15:09 Image Size: 44,029,247,488 bytes
I 01:15:09 Image Sectors: 21,498,656
I 01:15:15 Operation Successfully Completed! - Duration: 00:00:33
I 01:15:16 Operation Started!
I 01:15:16 Source File: -==/\/[BUILD IMAGE]\/\==-
I 01:15:16 Source File Sectors: 21,498,656 (MODE1/2048)
I 01:15:16 Source File Size: 44,029,247,488 bytes
I 01:15:16 Source File Volume Identifier: Moana
I 01:15:16 Source File Volume Set Identifier: 4A6D09D501480541
I 01:15:16 Source File Application Identifier: ImgBurn v2.5.8.0
I 01:15:16 Source File Implementation Identifier: ImgBurn
I 01:15:16 Source File File System(s): UDF (2.50)
I 01:15:16 Destination Device: [3:1:0] PIONEER BD-RW   BDR-209D 1.34 (E:) (ATA)
I 01:15:16 Destination Media Type: BD-R (Disc ID: RITEK-DR3-000)
I 01:15:16 Destination Media Supported Write Speeds: 2x, 4x, 6x, 8x
I 01:15:16 Destination Media Sectors: 24,438,784
I 01:15:16 Write Mode: BD
I 01:15:16 Write Type: DAO
I 01:15:16 Write Speed: 4x
I 01:15:16 Hardware Defect Management Active: No
I 01:15:16 BD-R Verify Not Required: Yes
I 01:15:16 Link Size: Auto
I 01:15:16 Lock Volume: Yes
I 01:15:16 Test Mode: No
I 01:15:16 OPC: No
I 01:15:16 BURN-Proof: Enabled
I 01:15:16 Write Speed Successfully Set! - Effective: 17,980 KB/s (4x)
I 01:15:16 Advanced Settings - Optimal Writing Speed: No
I 01:15:16 Filling Buffer... (80 MiB)
I 01:15:19 Writing LeadIn...
I 01:15:35 Writing Session 1 of 1... (1 Track, LBA: 0 - 21498655)
I 01:15:35 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 21498655)
I 01:15:35 Writing Layer 0... (LBA: 0 - 12219391)
I 01:39:04 Writing Layer 1... (LBA: 12219392 - 21498655)
I 01:57:10 Synchronising Cache...
I 01:57:13 Closing Track...
I 01:57:14 Finalising Disc...
I 01:57:29 Exporting Graph Data...
I 01:57:29 Graph Data File: C:\Users\me\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-209D_1.34_MONDAY-MARCH-13-2017_1-15_AM_RITEK-DR3-000_4x.ibg
I 01:57:29 Export Successfully Completed!
I 01:57:29 Operation Successfully Completed! - Duration: 00:42:13
I 01:57:29 Average Write Rate: 17,240 KiB/s (3.9x) - Maximum Write Rate: 17,621 KiB/s (4.0x)
I 01:57:29 Cycling Tray before Verify...
I 01:57:48 Device Ready!
I 01:57:49 Operation Started!
I 01:57:49 Source Device: [3:1:0] PIONEER BD-RW   BDR-209D 1.34 (E:) (ATA)
I 01:57:49 Source Media Type: BD-R (Disc ID: RITEK-DR3-000)
I 01:57:49 Source Media Supported Read Speeds: 8x
I 01:57:49 Source Media Supported Write Speeds: 2x, 4x, 6x, 8x
I 01:57:49 Source Media Sectors: 21,498,656
I 01:57:49 Source Media Size: 44,029,247,488 bytes
I 01:57:49 Image File: -==/\/[BUILD IMAGE]\/\==-
I 01:57:49 Image File Sectors: 21,498,656 (MODE1/2048)
I 01:57:49 Image File Size: 44,029,247,488 bytes
I 01:57:49 Image File Volume Identifier: Moana
I 01:57:49 Image File Volume Set Identifier: 4A6D09D501480541
I 01:57:49 Image File Application Identifier: ImgBurn v2.5.8.0
I 01:57:49 Image File Implementation Identifier: ImgBurn
I 01:57:49 Image File File System(s): UDF (2.50)
I 01:57:49 Read Speed (Data/Audio): MAX / MAX
I 01:57:50 Read Speed - Effective: 3.3x - 8x
I 01:57:50 Verifying Session 1 of 1... (1 Track, LBA: 0 - 21498655)
I 01:57:50 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 21498655)
I 01:57:50 Verifying Layer 0... (LBA: 0 - 12219391)
I 02:23:18 Verifying Layer 1... (LBA: 12219392 - 21498655)
W 02:23:26 Failed to Read Sectors 12219488 - 12219519 - Reason: L-EC Uncorrectable Error
W 02:23:32 Failed to Read Sector 12219488 - Reason: L-EC Uncorrectable Error
W 02:23:32 Sector 12219488 maps to File: \BDMV\STREAM\00800.m2ts
W 07:06:51 Failed to Read Sector 12219489 - Reason: L-EC Uncorrectable Error
W 07:06:51 Sector 12219489 maps to File: \BDMV\STREAM\00800.m2ts
W 07:06:54 Retrying (1)...
W 07:06:58 Retry Failed - Reason: L-EC Uncorrectable Error
W 07:07:01 Retrying (2)...
W 07:07:05 Retry Failed - Reason: L-EC Uncorrectable Error

This is me trying a third time with the build method instead of burning from an iso. It stops verifying at the same 56% mark though. Sorry I'm new to how to post log files so this is probably not the correct way.
 



#6 LIGHTNING UK!

LIGHTNING UK!

    Author of ImgBurn

  • Admin
  • PipPipPipPipPip
  • 29,024 posts
  • Gender:Male
  • Location:United Kingdom

Posted 13 March 2017 - 12:57 PM

Nope, that's perfect.

There's no difference between using Build mode or Write mode. If one succeeds or fails, the other should do too.

It looks like your drive is doing a bad job of burning the 2nd layer and it's producing an unreadable disc. Your drive's firmware is up-to-date and you aren't trying to burn too quickly, so try something other than 'RITEK-DR3-000' media.
Please don't PM me with questions that should be posted in the forum. I won't reply - Especially if you have post count of 0!!!

Replies to posts belong in the forum where everyone can read them. Please don't PM them.

In fact, don't PM me at all unless it's something I've asked to be told about!

Before asking questions, search the forum to see if someone else already has.

Use the FAQ and Guides forums to your advantage. I don't want to have to tell you to read them!

#7 dbminter

dbminter

    ISF God

  • Beta Team Members
  • PipPipPipPipPip
  • 5,271 posts
  • Gender:Male

Posted 13 March 2017 - 03:15 PM

Yeah, if a double layer media is going to fail, it will generally fail somewhere around the layer change as happened here.  Try VERBATIM Disc ID media.  Your drive, probably, just doesn't like RITEK media.  Besides, even if it burned correctly, you might have had playback issues with RITEK BD-R in Blu-Ray players.  I know the Playstation 3 doesn't like to play them properly.



#8 Rusty4683

Rusty4683

    ISF Newbie

  • Members
  • Pip
  • 7 posts
  • Location:IN

Posted 13 March 2017 - 10:11 PM

Thanks a lot! This is definitely the last time I buy any RiTek media. Some really damn expensive coasters lol. I will be trying Verbatim and I'll update, but itll be a couple weeks most likely. I really appreciate the assistance.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users