Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by Ch3vr0n

  1. Ch3vr0n

    Batch burn for folders?

    I have little to no experience with commandline. My imgburn is pretty much configured to no prompts. Just need something simple to burn one folder after another. Deleting source and stuff I'll do that myself. Maybe you can add batch burn folders in the next version. Seems like I'm not the only one that would like that. Sent from my Nexus 6P with Tapatalk.
  2. Ch3vr0n

    Batch burn for folders?

    Can you elaborate how? They all reside in the same folder. I'd love it if you could add that function in the next version (hopefully soon released). Would be kind of redundant to first turn them into iso's and then burn those iso's in batch with imgburn
  3. Ch3vr0n

    Cinavia Protection

    The 570 is out of the question, it's even on the net that the latest firmware mr4 or something did not have it. The 580 is a different matter. That's a 2nd quarter of 2012 model, meaning it falls under mandatory detection. If it didn't detect it at first, but did later then the hardware was already present just not enabled. As to the ps3, I did say that above. Sent from my Nexus 6P with Tapatalk.
  4. Ch3vr0n

    Cinavia Protection

    The first 'fix (software one)' as the name says only applies to PC's, since you can't install anydvd on a standalone. It's the second one that impacts physical players. (whether mkv or disc output). As to the players: ANY licensed Blu-ray player that was licensed on or after February 1st 2012, is required to detect it. That applies to software players as well as standalones. For software based players, i think powerdvd 10's 2nd to last version didn't detect it. It's last update and v11 and beyond do. For standalone's it's their license date that matters, NOT when YOU buy it. Example A licensed player bought on Feb 1st 2012, is not required to detect it. (Model was highly licensed before mandatory detection date) A licensed player that was licensed before Feb 1st 2012, you buy TODAY (if you manage to find one) is NOT required to detect it. It is only NEW players for which the model was located after Feb 1st 2012, that are required to detect it. Why that date? That's the date Cinavia became an official part of the Blu-ray standard, and detection became mandatory. Manufacturers have to implement it or risk losing they're license. It's not just super common on disks because of the high licensing fee for movie studios. ( $ to be allowed to use it, $ per movie title and $ for the amount of copies of said title) There's only a few studios that use it because of that after nearly 5 years of mandatory detection. - Sony (obviously as they were the main backers of it during inventing) - lionsgate - universal @lightning posts older ones older than that date are NOT required to detect it, they couldn't even if they wanted to. Standalone player detection is not firmware based, it's hardware based. Players older than that date simply lack the hardware to do it. The 'exception' was the PlayStation 3. It's Blu-ray player is a software based one, which is why detection wasn't present in 1 firmware and was present the next. They simply pushed a new firmware (4.05 I think), with a new player that detected it. Not surprising since it was Sony.
  5. Ch3vr0n

    Cinavia Protection

    Yes, it does it in 2 ways. 1) 'prevent Cinavia detection by software player': that AnyDVD setting patches the SOFTWARE player (like PowerDVD) to not detect the signal. That one doesn't remove Cinavia, it just prevents the player from detecting it and thus muting the audio 2) 'remove Cinavia from CloneBD audio copy': that setting is dependant on using CloneBD and in CloneBD downscaling of audio must be selected. When both are enabled, during the cloning process AnyDVD taps into CloneBD without it knowing that and applies the removal fix. (Since removing Cinavia requires audio processing, and that's not something AnyDVD can do on its own). CloneBD doesn't know this is going on and just continues cloning. Sent from my Nexus 6P with Tapatalk.
  6. Ch3vr0n

    bd-re 50GB not read by ps3 and stand-alone

    Blu-ray specification REQUIRES UDF 2.50. https://en.wikipedia.org/wiki/Blu-ray Use 2.1 and it's unreadable on ANY Blu-ray player. Ps3 and standalones alike. You're confusing disc version with the UDF file system. 2 completely separate things
  7. You need specific hardware (drive model) and specific brand of blank discs for that. Overburning is a tricky thing to do right, even with the correct tools.
  8. Ch3vr0n

    Cinavia Protection

    Cinavia isn't a copy protection, it's an audio drm. Copy protections prevent you from making a copy (like css). Cinavia doesn't do that, if it was a copy protection ImgBurn wouldn't be able to burn cinavia discs. Cinavia is an audio drm, it stops full audio playback. You can still copy it, you just can't properly play the copy. There's a difference.
  9. Ch3vr0n

    Possible booktype DVD-ROM on DVD-R

    Whether there is a setting there on the menu is irrelevant. The dvd-r standard simply doesn't have booktype specified and the discs simply don't support it. There's nothing else to say about it. It can't be done, period.
  10. Ch3vr0n

    Possible booktype DVD-ROM on DVD-R

    No, dvd-r doesn't support or need booktype. Even +r doesn't need it for modern players
  11. I stumbled upon this issue while doing the erasing for my other topic. So while the BH16 was erasing a disc, i fired up another instance to burn an iso to disc in my bh10. During load the bh16 obviously wasn't accessible during the start of the program. Now here's the catch. I loaded the ISO, and accidentaly forgot to swap the drive at the bottom from the bh16 to the bh10 and pressed "go". The 2nd imgburn instance started burning and a few seconds later, the "erasing imgburn" errored out and ejected the tray which obviously aborted the burn on the 2nd instance. Is this normal behavior? Shouldn't the "lock for exclusive access" (which i have all 4 boxes marked, defaults) have prevented this from happening? Or is it since it's also imgburn, that this is overridden?
  12. Guess I could think about it. Barring the 'drive locking' spti, are there significant benefits or improvements that either one has over the other? I've used elby for as long as I can remember after being told once to swap 'engine' because spti couldn't properly identify disc mid.
  13. Are there plans to update it so it actually locks it out completely? ** Edit ** or a workaround for this 'issue' in a future version of ImgBurn perhaps in case elby has no plans to do that.
  14. Let me know if you need me to do any testing. Feel free to email to if needed.
  15. Back then it failed to properly find the MID for my verbatims. You then advised me to swap to the elby engine and the drives properly found it. Ever since then i've used elbcdio, i have the full elby/redfox product suite anyway. I don't know how good your connections are but mine are very active (since i'm doing the NL translating for them), i've got a couple direct lines to both elby and redfox So who's going to contact them?
  16. Dunno, new system. My old one was running win 7. Can't say I deliberately reproduced this issue on win 7. Stumbled on this by accident. Using Microsoft's crap spti just isn't an option. Fails to properly Identify disc MID's. Posted a topic about that a long time ago. Was using elbycdio on 7 too and the same drives. So the only change is the os. Maybe it's something you can look into for the next version of ImgBurn. Just wanted to report it, it's not a big issue. Just need to keep an extra eye open that the correct drives are select per instance.
  17. seems like it's actually instance 2 that ejects it Anyway attached is the log. I pressed burn on instance 2 when instance 1 was 1% into zeroing sectors. Then closed both instances in the order of instance 1 first, 2nd instance last. though it seems instance are saved with first closed at the bottom. Attached is the log. In case it matters. Running Win 10 Pro x64 build 1607 G:\ bh16 H:\ bh10 I:\ dvd ram ImgBurn.log
  18. i can reproduce it. 1. Start imgburn 2. start to erase a disc (full disc) 3. launch 2nd instance 4. select Burn image to disc 5. "Busy" drive is listed in "destination" even though the log states "access denied" and bh16 is selected as default drive 6. select image > leave destination to bh16 7. press burn 8. error message, click continue 9. instance 2 begins burn 10. instance 1 errors and ejects tray.
  19. So i've been doing full erases on my bd-RE's from TDK's erase perfectly. Though my verbatim's (well the fake ones, can't get the real "blue/silver" ones anymore) with ID CMCMAG-CN2-00 seem to trigger "W 04:22:06 WRITE (12) 'Streaming' Not Supported!" when i'm erasing them with my BH16NS40, however on my BH10NS30 that warning message doesn't appear. anything i need to "worry" about. Brand new drive the bh16.
  20. Ch3vr0n

    Erase disc "issue" (warning)

    Oh the drive supports bd-r fastwrite just fine That said, i'll re-erase a disc of either MID in that drive to generate log. Just for the sake of clarity since their are 2 erase options i'm using Drive > erase > full (not smart erase)
  21. Ch3vr0n

    Transfer settings

    Lightning I've just built an entirely new system (no more q9550, hello i7 6700k), and I was wondering what the best and fastest solution would be to transfer my ImgBurn settings. Pretty sure a registry migration isn't an option as the 'old' system uses w7 and the new one is running w10.
  22. IMGBurn only burns the data you feed it, it can't cause playback issues. Your problem is how you've done the voice over and powerdvd not detecting them. I don't know a fix but I do know it's not an IMGBurn problem. I suggest you test the MPEG file itself first in powerdvd, it does play those.
  23. Ch3vr0n

    can i burn Dvd and Blue-ray videos ?

    That would be convertxtodvd if paid, or freemake DVD converter for a free option. IMGBurn only burns what you give it, it doesn't convert.
  24. Ch3vr0n

    can i burn Dvd and Blue-ray videos ?

    Drag the folder over holding the video_ts folder and you're done. If IMGBurn asks you to make certain corrections, let it. But pretty sure there are tutorials, might want to check the tutorials section ;-)

Important Information

By using this site, you agree to our Terms of Use.