spinningwheel

I can't get the current Doctors here without subscribing to a much more expensive plan with Time Warner. The last episodes that I saw was when Tennant (?) was replaced by the skinny guy. I have to wait for NetFlix to pick up the last couple seasons I guess.

Get some more.

Nope, they are hardware additions to your system and I don't know of any virus code that can be stored where there is no live memory. What antivirus program are you running and did you install it first thing after the reinstall of windows?

See this post and READ EVERYTHING when you install the program. http://forum.imgburn.com/index.php?showtopic=21932

If you did everything the link explained, post a copy of the failed log from the recent failure. If you want to shut down unnecessary processes while burning, get a neat little program called EndItAll here: http://enditall.en.softonic.com/ and run it prior to using ImgBurn. Don't screw around with msconfig unless you know what you are doing. You don't have a DMA problem so don't mess with that either.

Which is really this: So we advise you to do this: http://forum.imgburn.com/index.php?showtopic=8000 AGAIN!!! However, if you want to disagree with us, then good luck because for the problem to be resolved we need your cooperation. Not a running narrative about what type of media you think you have.

http://forum.imgburn.com/index.php?showtopic=8000

Had you decided to use the search you would have found this about your problem: http://forum.imgburn.com/index.php?app=core&module=search&do=search&fromMainBar=1 Had you read the pink bit on top of this forum page you would have found this: http://forum.imgburn.com/index.php?showtopic=8000 So, the answer is and you'll learn more about the program and other stuff.

Settings=Default

Update ImgBurn please. The power cal area error means that your drive can't figure out how to set the laser power to burn your media. With the errors above already reported it's simple enough to imply that your drive simply does not like the RICOHJPN-D01-67 media. Since you can't make it like the Ricoh media, your choices are really limited either make the change to Verbs or replace the drive.

OK a brief check on several forums shows that this media I D is used by several name brands and everyone posting seems to have a problem with them. Some claim they're knock-off Verbs, others have no explanation as to how they got the Verbatim branding. I would shit can them and order some real Verbatim discs from a trustworthy source such as those listed in the link in post # 2.

Media is seldom manufactured and sold by the same company. The big commercial type names are, for the most part, simply resell someone elses product that has been rebadged with their brand name on it. The best way that I have found is to only buy from reliable retailers who tell you what the MID of the disc is. If you look at the bottom of this post you will find links to the sites where most of us buy our media: http://forum.imgburn.com/index.php?showtopic=8000

A quick Google shows that your drive can read about anything...however...you want to write something and for that you need a drive that can also write.

You can start by posting a copy of the failed logfile.

Read: http://forum.imgburn.com/index.php?showtopic=8000

ImgBurn does not create the logical time out error, that belongs to the drive/firmware/media combo most times. Also ImgBurn has never and will not copy media that has copy protection on it. Also post a full log please. And have a read: http://forum.imgburn.com/index.php?showtopic=8000

Moved to chat as this is not an ImgBurn function and has nothing to do with the program itself. In order to create chapters you will have to find an authoring program that will do that for you. I don't know of any personally, however someone will undoubtedly come along with suggestions about what to use. In the meanwhile, do a Google for movie authoring programs and read up on what it is you want to do. I even did the Google and I found the following freeware, take your pick: http://www.google.com/#fp=9735961193067d7&q=movie+authoring+software+free

The reason that I suggested the update was because we do not offer support for earlier versions of ImgBurn normally. When you update you eliminate any of the problems associated with the version that you are currently using and we are all on the same page when it comes to the software. Did a search on your media MID and maybe you should read a little. (That's why I put the link in the last response. The info contained there applies to single layer discs also.): http://www.google.com/#fp=f45a2b3d063d39e5&q=disc+id+cmc+mag-m01-00

Please update ImgBurn. And read this: http://forum.imgburn.com/index.php?showtopic=8000

It would be a start.

The same link applies to single layer dvd's as well as dual layer dvd's.

I'm not trying to be a smartass, but what is the problem? If it's high readings with pi and pe, are the discs that you are making viewable/playable or not? I looked at your other post and comparing what one program says as compared to another similar program is really meaningless since they both have different authors and undoubtedly different ways of handling data. If your discs work in whatever device you are using them in...then what? If the disc works, ImgBurn did what it's supposed to, if it doesn't then post a copy of the failed logfile please.

C I 12:47:47 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64) If you already have a preconceived notion of what the problem is, and if you are too set on using the crap media that you have, then what are we supposed to do to help you? Read the link on DL problems that is mentioned in the pink bit on top and follow it, or don't...

Good luck and let us know how it sorts out.