DoBoY Posted November 9, 2011 Share Posted November 9, 2011 So here's the deal, i am using the iHas124B with Max Burner firmware, i know this should not be supported but the support thread at executer was shut down for a ridiculous reason and still need help. For some reason my burns only "actually burn" about a third of the disc.. then according to imgburn it was complete but with a visual inspection i can see that it only burnt 1/3 of the disc. any ideas why this could be happening. I can burn a 4.7GB ritek just fine with the same firmware. Link to comment Share on other sites More sharing options...
mmalves Posted November 9, 2011 Share Posted November 9, 2011 Post the log of one of those bad burns. Link to comment Share on other sites More sharing options...
DoBoY Posted November 10, 2011 Author Share Posted November 10, 2011 You guys are going to love this. The way I fixed it was by setting the write speed to 4X instead of AWS... Weird or what. I have only made on successful so far but had 5 bad burns before setting the speed. Btw is this acceptable quality in Kprobe? Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 10, 2011 Share Posted November 10, 2011 If you don't configure the AWS feature it'll just default to burning at MAX speed - i.e. 8x for MKM-003-00 media. Yes, that's a great burn. Link to comment Share on other sites More sharing options...
Recommended Posts