dbminter Posted March 5, 2014 Posted March 5, 2014 I've seen this happen on just about every drive I've ever owned. I'll put in a Verbatim MKM 8x DVD+R DL that, randomly, only writes at 4x max. ImgBurn is set to write at MAX. ImgBurn says that 8x is available for these discs before the burn starts. Yet, sometimes, and it appears to be random, that it only writes at 4x. Is there a particular reason for this? Or is it again down to just whatever the drive returns for the maximum write rate?
LIGHTNING UK! Posted March 5, 2014 Posted March 5, 2014 No reason that I can think of, no. ImgBurn doesn't really pay any attention to the write speeds reported by the drive. It sends the command to set the speed to whatever you've selected and reports back with whatever the drive then thinks it's going to be burning at. If the 'Effective' speed is shown to be 8x, it should be burning at 8x. Internal drive stuff is then what would be causing it to burn at a different speed to that - either something in the firmware or the chipset itself maybe.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now