Jump to content

Just burned 4 dl coasters on 2 dif devices. Advice?


Recommended Posts

Posted

Media: Memorex (Ritek D01-01)

Sony DVD RW DRU-710A Specs from CDRInf

SONY DVD RW DRU-800A

Specs from CDRInf

 

1) The first dvd burned ok, but received an error during verification, which I was able to ignore, and imgburn kept verifying in the background. I played the dvd back with PowerDVD, skipping to each chapter, and all seems fine. So this one isn't really a coaster, but that error worries me a bit. Burned on the DRU-710A Sorry--no log for this one.

 

2) The second dvd (of a different movie) was a coaster, burned on DRU-710A again. I received a write error (see log below). It was a MDS of a split ISO (split at 4GB with DVDD***er). [i split them so that they will fit as data on dvds in case DL doesn't work). The error: "Failed to write sectors 2495776 - 2795808 Write Error".

 

3) Tried it again for the same MDS file on the same drive. Wrote ok. Error during verification: "Failed to read sector 2503344 - Unrecovered Read Error". I played it back with PowerDVD, and playback froze at the 2h01 minute mark (the start of the 2nd layer perhaps?).

 

4) This time I got a single file MDS of the same movie (just in case file splitting was the issue), and tried burning on the DRU-800A. I received an I/O Error at 70% during the write process. No log for this but I copied the error box: "Invalid Address for write". "CDB: [bunch of numbers] Interpretation: Write (10) Sectors: 2554464-2554495 Sense Area [more numbers] Interpretation: Invalid Address for Write".

 

Any advice would be much appreciated. And yes, I am expecting the ol' "use better media", and I will next time, but this was my first attempt at DL, and I wanted to 'test' with $4 dvds, not $8 just in case something else was at issue.

 

__________________________

LOGS

___________________________

 

2)

I 13:33:21 ImgBurn Version 1.0.0.0 started!

I 13:33:21 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 1)

I 13:33:21 Initialising SPTI...

I 13:33:21 Searching for SCSI / ATAPI devices...

I 13:33:21 Found 1 DVD-ROM and 1 DVD?RW!

I 13:33:42 Operation Started!

I 13:33:42 Source File: N:\Movie.MDS

I 13:33:42 Source File Sectors: 3,647,530 (MODE1/2048)

I 13:33:42 Source File Size: 7,470,141,440 bytes

I 13:33:42 Source File Implementation Identifier: MEI

I 13:33:42 Destination Device: [1:0:0] SONY DVD RW DRU-710A BY01 (D:) (ATA)

I 13:33:42 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)

I 13:33:42 Destination Media Sectors: 4,173,824

I 13:33:42 Write Mode: DVD

I 13:33:42 Write Type: DAO

I 13:33:42 Write Speed: MAX

I 13:33:42 Link Size: Auto

I 13:33:42 Test Mode: No

I 13:33:42 BURN-Proof: Enabled

I 13:33:42 Optimal L0 Data Zone Capacity: 1,863,776

I 13:33:42 Optimal L0 Data Zone Method: Copied From Original Disc

I 13:34:14 Filling Buffer...

I 13:34:15 Writing LeadIn...

I 13:34:17 Writing Image...

W 13:59:38 Failed to Write Sectors 2495776 - 2495807 - Write Error

[bunch of retries omitted]

E 14:05:19 Failed to Write Sectors 2495776 - 2495807 - Write Error

I 14:05:19 Synchronising Cache...

I 14:05:20 Closing Track...

I 14:05:24 Finalising Disc...

E 14:12:16 Failed to Write Image!

E 14:12:16 Operation Failed! - Duration: 00:38:34

I 14:12:16 Average Write Rate: 2,680 KB/s (1.9x) - Maximum Write Rate: 3,386 KB/s (2.4x)

I 14:18:37 Close Request Acknowledged

I 14:18:37 Closing Down...

I 14:18:38 Shutting down SPTI...

I 14:18:38 ImgBurn closed!

 

3)

 

I 15:27:25 ImgBurn Version 1.0.0.0 started!

I 15:27:25 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 1)

I 15:27:25 Initialising SPTI...

I 15:27:25 Searching for SCSI / ATAPI devices...

I 15:27:25 Found 1 DVD-ROM and 1 DVD?RW!

I 15:28:11 Operation Started!

I 15:28:11 Source File: N:\Movie.MDS

I 15:28:11 Source File Sectors: 3,647,530 (MODE1/2048)

I 15:28:11 Source File Size: 7,470,141,440 bytes

I 15:28:11 Source File Implementation Identifier: MEI

I 15:28:11 Destination Device: [1:0:0] SONY DVD RW DRU-710A BY01 (D:) (ATA)

I 15:28:11 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)

I 15:28:11 Destination Media Sectors: 4,173,824

I 15:28:11 Write Mode: DVD

I 15:28:11 Write Type: DAO

I 15:28:11 Write Speed: MAX

I 15:28:11 Link Size: Auto

I 15:28:11 Test Mode: No

I 15:28:11 BURN-Proof: Enabled

I 15:28:11 Optimal L0 Data Zone Capacity: 1,863,776

I 15:28:11 Optimal L0 Data Zone Method: Copied From Original Disc

I 15:28:43 Filling Buffer...

I 15:28:44 Writing LeadIn...

I 15:28:45 Writing Image...

I 16:05:27 Synchronising Cache...

I 16:05:28 Closing Track...

I 16:06:04 Finalising Disc...

I 16:07:46 Operation Successfully Completed! - Duration: 00:39:35

I 16:07:46 Average Write Rate: 3,314 KB/s (2.4x) - Maximum Write Rate: 3,504 KB/s (2.5x)

I 16:07:46 Cycling Tray before Verify...

W 16:07:57 Waiting for device to become ready...

I 16:08:05 Device ready!

I 16:08:05 Operation Started!

I 16:08:05 Source Device: [1:0:0] SONY DVD RW DRU-710A BY01 (D:) (ATA)

I 16:08:05 Source Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)

I 16:08:05 Verifying Sectors...

E 16:49:23 Failed to read Sector 2503344 - Unrecovered Read Error

E 16:49:23 Failed to Verify Sectors!

E 16:49:23 Operation Failed! - Duration: 00:41:17

I 16:49:23 Average Verify Rate: 2,021 KB/s (1.5x) - Maximum Verify Rate: 7,560 KB/s (5.5x)

I 17:08:41 Close Request Acknowledged

I 17:08:41 Closing Down...

I 17:08:41 Shutting down SPTI...

I 17:08:41 ImgBurn closed!

 

 

4)

I/O Error! (70%write)

Device: [1:0:0] Sony DVD RW DRU-800A KY01 (D:)(ATA)

 

ScslStatus: 0x02

Interpretation: Check Condition

 

CDB: 2A 00 00 26 FA 60 00 00 20 00

Interpretation: Write (10)-Sectors:2554464-2554495

 

Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00

Interpreation: Invalid Address for Write

Posted
And yes, I am expecting the ol' "use better media", and I will next time

 

i think you just said it yourself :/

 

unfortunately , the ritek d/l discs aren't good enough on most burners, the occasional good burn may be possible , but generally they make coasters.

are you changing the book type to -ROM using the lite on tab?

 

i use only verbatim for d/l burns but have seen some promising results from RICOHJPN-D00-01 discs

Posted

I've had the same results with RITEK-D01-01 DL discs, failure to verify. The odd one will play well on stand alone players, but I have strong doubts to their widespread compatability and longevity. They've long been considered unreliable DL media, and recent personal testing has shown me that they have not improved. Like Corny says, better media is your best bet.

Posted

As expected. Well, at least there is nothing in my logs that point to something in my hardware.

 

Forgive my ignorance here, but are the bad discs just bad with movies? In other words, can I use these for data? (I already have some very pretty coasters for the cinema, and in any event, I am afraid these discs would harm the nice wood armrests) ;)

Posted

I have never used DL's for data, but I would fully expect the same outcome. If it's a matter of just using them for something, I'd use them for video, but make sure you have another version as backup. Or sell them on ebay LOL.

Posted

I have had 100% success with Datasafe Ritek D01 discs. It is important to use the latest firmware to maximise writing success.

Posted
Forgive my ignorance here, but are the bad discs just bad with movies? In other words, can I use these for data?

 

Contrary to advice given by some experts, blank DVDs are not segregated into those that are more compatible with movies and others for "normal" data like .doc files or whatever. What they store is immaterial. Data is data. Disk quality is the only real difference.

Posted (edited)

I still laugh when I see people trying to do false economy and throwing away $4 on Riteks instead of "investing" $8 in Verbatims.

 

What is it that they say about paying peanuts?

 

Regards

Edited by blutach

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.