LivingByPlan Posted August 28, 2007 Posted August 28, 2007 I insert a Dual Layer DVD, fresh out of the box. ImgBurn goes through the process of identifying the media but ends with the message "Device Not Ready (No Reference Position Found). Am I missing something or does the software not recognize dual layer automatically.
dontasciime Posted August 28, 2007 Posted August 28, 2007 Whichever DVD writer you have, make sure you are using the latest firmware for it and use good quality media EG the only one that is worth having are the verbatim 2.4 speed + dual layer
LIGHTNING UK! Posted August 28, 2007 Posted August 28, 2007 The problem is with your drive/media, not the software. Update the firmware on it and perhaps it'll start working. Failing that, buy some different DL discs that it DOES support.
LazLong Posted October 22, 2007 Posted October 22, 2007 Whichever DVD writer you have, make sure you are using the latest firmware for it and use good quality media EG the only one that is worth having are the verbatim 2.4 speed + dual layer Add to that Verbatim made in Singapore NOT India. I have read, and now have the unfortunate personal experience, that Verbatim DL made in India can be very problematic. I just received an order of 100 DVD+R DL Verbatim made in India, and of the first 30 discs I've burned, 11 are coasters. For perspective, I've burnt in excess of 400 Verbatim DVD+/-R DL made in Singapore with only one coaster that I can recall. Perhaps Lite-On and Plextor need to come out with a firmware revision to properly work with this media, or perhaps it just sucks ass....
blutach Posted October 23, 2007 Posted October 23, 2007 Yes, it always seemed a sus move for Verbatim to use MBI to make disks for it. Sad. Regards
Recommended Posts