chewy
-
Posts
1,400 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by chewy
-
-
I would go with a 2.6 windsor or even a 2.5 brisbane core, the 6000 is pushed to it's limits already with heat and power issues
better power supply
since you are using 4 ide's you will need a good power supply
http://www.newegg.com/Product/Product.aspx...N82E16811119068
http://www.newegg.com/Product/Product.aspx...N82E16817159040
compare to the raidmax power
http://www.newegg.com/Product/Product.aspx...N82E16817152029
-
try my controls(top)
in your control panel
options(bottom left)
email settings
uncheck
Enable 'Email Notification' by default? -
-
especially in stupid, political threads like this one.
Duh!
-
ImgBurn Support Forum > Other > Chat
now hijacking is another matter
-
I would suspect that the flash update got hosed, I doubt it was the firmware used but the technique and the way the hardware is configured
I prefer to flash with the dvd burner as standalone master on the secondary ide(if there are 2) in safe mode so I can be sure the drive is in pio not dma(those durn liteons go to dma 4).
-
well my ddr500 will go to 270 mem bus if I turn off 1T command rate
43.9ns latency
-
2-3-3-6 should be stock spd at 400 for corsair xms?
I couldn't get any overclock out of my cas 2 ddr 400 ram, but then I was pushing the durn HT too high
-
from the tests I have seen, adding the extra L2 to the windsor core gave neglible performance increases, amd's onboard memory controller is very efficient already.
@Blu,
is your cas 2 ram running at stock mem frequency with the 25% OC to fsb?
ran into some references to changing from 1T command rate to 2T to enable pushing the fsb/mem freq envelope further
-
-
have you applied the chipset inf patch/driver?
it's fairly new
also have you updated vista, there were some patches to address that legacy ide driver
there's another strange setting in power management acpi for ide/raid
-
-
just to test I would have the pioneer as master with the other drive disconnected(power and pata cable)
make sure the dvd burner is connected to a power lead that goes straight to the power supply
-
the log shows 1,0,0
screenshot shows 1,1,0
are the jumpers correct on the optical drives
master for top drive at end of cable and slave for middle of cable?
there are new inf drivers for that mobo
-
2 hard drives, 2 dvd burners, all on seperate cables, standalone masters
sata or pata doesn't really matter
same iso or different ones neither
8x works fine
one hard drive, one iso still has to be read twice, and 4X is about all she wrote
drive read heads are working their butt off
-
"FreeEasyBurner"?
if it works and imgburn doesn't, wonder if it is loading any filter drivers that interfer?
-
imgburn has this great feature called filter driver load order
===============================================Filter Driver Load Order - ImgBurn v2.3.2.0
===============================================
Upper Device Filter: redbook
Upper Class Filter: [None Found]
Device: CD/DVD-ROM Device
Lower Class Filter: ElbyCDFL
Lower Device Filter: imapi
Filter Name: redbook
File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
File Description: Redbook Audio Filter Driver
Product Name: Microsoft
-
I am the idiot that told everyone during the first gulf conflict that this had nothing to do with OIL
conclusion, everything the house of bush and saud does has to do with oil
color me pinko michael moore
-
or buy a divx capable player and save yourself a lot of time
-
(Disc ID: CMC MAG-M01-00)
I just saw this problem with your log chewy...
you don't think I would chance one of my last verbatims in an 8x cof test do you?
sh!te I even forgot to lower the burn speed to 4x
-
I 20:30:51 ImgBurn Version 2.3.2.0 started!
I 20:30:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 20:30:51 Total Physical Memory: 523,764 KB - Available: 320,608 KB
I 20:30:51 Initialising SPTI...
I 20:30:51 Searching for SCSI / ATAPI devices...
I 20:30:55 Found 2 DVD
-
-
Hmm... a quick look at the thread doesn't impress me that much. Some of those claiming to burn at 18x actually burned at 4x, 8x or 12x. Not what I'd call exciting. Particularly when the maximum speed was attained near the outer edge of the disk, just like we said it does. Physics is a cruel mistress.
page 2 had some decent burns that hit 16x, even by a noob
of course the purpose of the thread was not burn as fast as possible, but to have good burns in a timely manner
-
the bitsetting stuff is done when the disc is finalised
I always wondered about that pause at the end of burn, so the laser goes back to inner tracks?
pardon my stupidity
mobo
in Chat
Posted
the 2 or 3 raidmax's I have seen had issues within a year or few months
they claim +12V@28A but Hold-up Time >10ms at full load
whereas the coolmax(not that good a brand) +12V1@18A, +12V2@18A
they would be a little more conservative
http://www.coolmaxusa.com/productDetailsPo...category=single
the connectors tell a lot too