cornholio7

if it were me, i would buy an external burner and forget using the matshita. just my opinion

try cleaning the lens, it may help

imgburn tells us you have 1.02 http://forum.rpc1.org/dl_firmware.php?download_id=2180 go to the above website, click on 1.03 and save it on your pc, make sure there is no disc in the drive, double click on the downloaded firmware, avoid accidental power down when flashing , just follow the onscreen instructions , let the firmware install and afterwards, reboot your pc

edit : see below

if you still have the iso on your hdd, you can verify the burnt disc against the original iso

imgburn can't read protected discs

no problem

check the faq http://forum.imgburn.com/index.php?s=&...dpost&p=975

do you have test ticked?

they were some last minute changes that were made pre release. check the website

Sessions: 1 Sectors: 347.944 Size: 712.589.312 bytes Time: 77:21:19 (MM:SS:FF) Supported Write Speeds: 12x; 16x TOC Information: Session 1... -> Track 01 (Audio, 03:38:70, LBA: 0 - 16419) -> Track 02 (Audio, 03:28:50, LBA: 16420 - 32069) -> Track 03 (Audio, 04:32:24, LBA: 32070 - 52493) -> Track 04 (Audio, 03:31:33, LBA: 52494 - 68351) -> Track 05 (Audio, 02:56:74, LBA: 68352 - 81625) -> Track 06 (Audio, 03:13:69, LBA: 81626 - 96169) -> Track 07 (Audio, 04:30:71, LBA: 96170 - 116490) -> Track 08 (Audio, 04:56:53, LBA: 116491 - 138743) -> Track 09 (Audio, 03:56:02, LBA: 138744 - 156445) -> Track 10 (Audio, 04:21:28, LBA: 156446 - 176048) -> Track 11 (Audio, 03:23:74, LBA: 176049 - 191347) -> Track 12 (Audio, 05:12:52, LBA: 191348 - 214799) -> Track 13 (Audio, 05:17:65, LBA: 214800 - 238639) -> Track 14 (Audio, 04:16:13, LBA: 238640 - 257852) -> Track 15 (Audio, 03:20:39, LBA: 257853 - 272891) -> Track 16 (Audio, 03:53:11, LBA: 272892 - 290377) -> Track 17 (Audio, 03:38:70, LBA: 290378 - 306797) -> Track 18 (Audio, 02:18:01, LBA: 306798 - 317148) -> Track 19 (Audio, 03:32:06, LBA: 317149 - 333054) -> Track 20 (Audio, 03:18:39, LBA: 333055 - 347943) -> LeadOut (LBA: 347944) ATIP Information: Start Time of LeadIn (MID): 97m27s45f Last Possible Start Time of LeadOut: 79m59s74f

can you post the whole log please?

not something imgburn can do, you would need to use a dvd re-authoring tool, like maybe TMPEGAuthor http://www.pegasys-inc.com/en/index.html

is your ps2 chipped?

unfortunately ,cmc is regarded by many as one of the worst dye manufacturers , i would expect your crc errors to disappear if you use verbs or yudens i would slow the burn down to 8x as well from an external hdd when you get those buffer underruns

i would try burning the same iso to a verbatim or taiyo yuden disc and see if you get the same result. a log would show us the MID , you can find it under help->imgburn logs, just copy/paste the relevant log

http://forum.rpc1.org/dl_firmware.php?download_id=1517 go to the above website, click on 1.0c and save it on your pc, make sure there is no disc in the drive, double click on the downloaded firmware, avoid accidental power down when flashing , just follow the onscreen instructions , let the firmware install and afterwards, reboot your pc

edit: try some verbatim discs, CMC arent very good , try updating firmware to 1.0c

there is slightly more space on DVD-R (4489MB) it could be a factor if your image is too big for DVD+R (4482MB) change between the two and look at 'maximum sectors' as you change profile

i think blutach edited his own post and wasn't asking you to edit yours

imgburn will not read protected discs

Go click the 'PayPal' button on the main web page http://www.imgburn.com/

you are using the wrong guide, use read mode to copy the disc to your hard drive then change to write mode to burn the iso http://forum.imgburn.com/index.php?showtopic=61

use the .mds not the .iso file

try slowing to 4x