LIGHTNING UK!

That isn't possible at the moment. I'll add support for it though.

Check the disc in your PC, I'm sure it'll say there are 19 tracks. As such, it's probably an issue with the headunit or your burner is creating a non compliant disc. Some older Samsung drives used to do that.

Yeah just burn the ISO as is using the 'write image file to disc' option. Just make sure ImgBurn mentions 'Bootable' next to where it says 'File Sys' in the 'Source' box once you've loaded the ISO.

New member cannot hijack other peoples threads. OpenCandy is just an advertising platform. It's serving up program offerings in the same way Google AdSense serves up adverts on a webpage. Whichever advertiser bids the highest for a given request is the one that gets shown to the user. There are several ways to install without ever seeing the OpenCandy offers and these have all been documented here on the forum (and in the OpenCandy FAQ). You can also just 7zip the setup exe and drag out the ImgBurn.exe file yourself. Nothing is going to get 'sorted out'. Just adapt and deal with it.

You can't rectify it, it's normal for iHAS B drives to fail with that error when the program attempts to set the layerbreak. It's already in the right place though, hence why the 'Effective' line is correct and the burn continues without you doing anything.

Install.bat calls installfilter.exe with the madflac.ax file as the parameter I've personally tried and tested madFlac. It was one of the only flac filters that would decode a flac file and give me a wav file that 100% matched the original wav file.

Not the advanced tab, advanced input mode. Click the 'input' menu at the top of the main window and then click advanced.

Like you said, the drive is old

Install the madflac directshow filter. It's linked at the bottom of the audio cd guide in the guides forum.

So the file is called '01.In Sharky Water.flac' but the CUE says it's '01 - In Sharky Water.flac' ? The names must match exactly. Can you get a screenshot of the folder in explorer for me please? Use 'Details' view and try to make sure the name column shows the complete filenames. Upload the actual CUE too please.

Do the files exist in the same folder as the CUE? Are they still called those names? (don't forget to make Explorer show file extensions if it isn't already doing so - you may end up with 'xxxx.wav.flac' or 'xxx.flac.wav' as a name otherwise). It should be quite easy to work out why it's not working when you have everything there infront of you.

They might be on your hdd but that doesn't mean they're ending up in different folders in the image / on the disc. You're probably just dragging both 'c' folders to the source box yeah? You'd have to 'preserve full pathnames' so that the different parent folders are added to the image to get around the clash. The program wouldn't error out if there wasn't a problem somewhere along the line. Take a screenshot of the error message and also of the main ImgBurn window showing the 'Source' box (ideally in 'Expanded' form). All of this stuff is made much easier/clearer by using Advanced input mode and the Disc Layout Editor window.

Sorry, I can't really tell / do anything without a log. Both methods work fine for me. What gets written to the image file or directly to disc is also identical. Can you burn to a BD-RE to try and capture the error? Technically, even just burning to DVD-RW / DVD+RW would do the job. Obviously this isn't a generic issue as ImgBurn is used by loads of people all over the world for BD burning. Lots of applications actually hook into it for that very purpose - BD Rebuilder etc. If it just flat out didn't work, I'd have known about it aaaaages ago.

Turn off 'perform opc before write', you don't need it on. You don't need the payload tool either, it's built into 2.5.8.0. As for the actual issue, I'd guess it's down to bad communication over your USB adapter. Can't you plug it in directly via sata/esata?

If they've been converted to flac files, you'll need to update the CUE file so it points to flac files and not the original wav files. Just do a find/replace on .wav" with .flac"

There's no difference between writing files/folders or writing an ISO. There's only 1 lot of code that does the actual burning.

When you're in Build mode, the 'information' tab is on the right of the main screen. You really can't miss it. Click the 'calculate' button on it and you'll get your progress / capacity bar. To enable Advanced input mode (and the disc layout editor window), just click the 'input' menu item at the top of the main window and select 'advanced'.

2 files with the same name can't end up in the same folder. If it's not obvious how the combination of several source folders will end up in your image, switch to Advanced input mode and use the more visual way of building your disc.

Those files were present in the folder but won't make it into the image or onto the disc. Thumbs.db is usually created by the OS when a folder contains some pictures. It's a cache of the thumbnail views explorer displays.

I didn't insult you, I asked you to follow instructions.

I believe the greyed out / disabled looking radio button on the program offer screens is being worked on (made optional or gotten rid of completely). That has to be done at OpenCandy HQ though and is nothing to do with me.

You don't need to copy + paste anything from the family tree prompt, it gets written to the log window - which you can then copy + paste. Please try and follow what I actually say in my posts and not just what you think you're reading.

Boot into safe mode and see if the same thing happens. Don't forget that the erase should take 15 mins. Your log says 14:03 and you posted it at 14:07... that isn't long enough for it to finish. Stick with the latest version and post the updated family tree info please. If you're burning automatically from DVD Flick, copy the ImgBurn.exe from ImgBurn's folder into the DVD Flick one and replace the existing (old) version.

OK well the first thing I'd do is install the latest Intel Chipset Device software. http://downloadmirror.intel.com/20775/eng/infinst_autol.exe Reboot, install a newer Intel Rapid Storage Technology driver and then reboot again. http://downloadmirror.intel.com/20768/eng/STOR_allOS_10.8.0.1003.exe

I'm not asking you to try erasing the disc again, I just need more info about your system (and the 'Family Tree' feature provides it). Your issue is nothing to do with ImgBurn, so reinstalling won't do anything.