ianymaty

I'm using MAXELL DVD-R's that have RITEKF1 MID and have no problem at all with them. Two burners are dead now, one was LITE-ON DVDRW LH-20A1L the other was ASUS 0001 DRW-2014L1 the discs have no problems reading back. Now I'm stuck with TSSTcorp CDDVDW SH-S203D from a disasambled computer and still burn RITEKF1 without problems. When this will go out I'll get an Optiarc.

Yeah, the time is shown in hours and minutes, guess it could be even few seconds apart... Anyway the problem was sorted and that's the important part

At the top there are 8 mirrors for ImgBurn. This shoud start the direct download http://download.imgburn.com/SetupImgBurn_2.5.5.0.exe Ooops, forgot to refresh

Up in the menu bar (the blue one) the second option is the Download, there you pick wich server you want to download the setup.

There is a pinned topic about that. Please, read it. http://forum.imgburn.com/index.php?showtopic=12200 In addition, read the pink box above too.

If cleaning the lens not solve the problem you better start looking for a new drive, a normal size one. Avoid slimline/laptop drives since they are not recommended for dual layer media.

Happy Birthday mmalves!

A log is more helpful than a screenshot. You can access old logs via Help menu.

ImgBurn is in constant development/improvement state. A new release will be in near future (when the time comes). Stay tuned!

http://forum.imgburn.com/index.php?showtopic=18695

Did you checked the Guides ?

Try with DVD Shrink.

Go on now and update to SP1. It will help your system in stability and security.

If the burn and verify was succesfuly on the disc, ImgBurn has done its job. You can dig in the folder structure for problems or the Panasonic's media compatibility. About folder structure read here http://forum.imgburn.com/index.php?showtopic=18594 A log would be nice.

The speed of burn don't matter as long as the disc is readable. Some burners do a better job at higher speeds than do at low speeds. Laptop/slimline burners aren't recommended for burning DL media. An Optiarc 72xx put in a decent external USB 2.0 enclosure should do the job.

Without a log we can't realy help you. See the pink box above? Read this http://forum.imgburn.com/index.php?showtopic=12200

Buy some cheep chinese table watches, discard the case, take out the the pointers, stick/glue a disc on it, put back the pointers, figure out some shue for them and give them to friends. You should end up with something like this.

Your drives firmware is way back to 2004. Try the latest A306 that is probably still old (from 2006) for that media. If that don't work, other things to try are listed here. http://forum.imgburn.com/index.php?showtopic=8000

Welcome to the forum. ImgBurn is a standalone program and don't use/need any add-on. For Linux you just run it under wine.

ImgBurn is not for that. Use a virtual drive to mount the iso or use ISOBuster or WinRAR to extract the content.

You give almost no detail and don't provide the log as it say in the pink box at the top of the page. If you car stereo reads only Audio CD, you should follow this guide. http://forum.imgburn.com/index.php?showtopic=5555

Did you ever looked in the Guides section? It's there for this reason. You need to follow this guide

Can the drive read any previous burns or original pressed discs? Try installing latest chipset/storage drivers. This site may help http://www.ma-config.com/ You can have as many burning programs you want as long as they not running some services in background that can keep the drive occupied. Could be bad media. What it say in status bar with a disc inserted? Do you have more than one drive? The program may point to the other.

SP1 will help your computer (the system) not the drive itself. You still not post the full log, it should similar end like this You did not responde to spinningwheel. Are you deleting the info Do you get a prompt with an error? Post a screenshot of it. To restore the default settings in ImgBurn go to Tools > Settings and click the Restore Defaults button on bottom left.

SP1 for Windows 7 is out for a while, you should update.