blutach

Most of the UK betas get their stuff from SVP Communications, who have very generously supplied us with discs for testing. http://svp.co.uk/ Regards

Select the language in Tools --> Settings --> General Regards

If your drive can't read, you need to examine your cabling and possibly DMA. The drive may even be on the way out. Regards

Welcome to ImgBurn Forum. Sadly, it's not that different from what we've seen before. Update your firmware (to version 1.41); yours is a long time out of date - http://forum.rpc1.org/dl_firmware.php?download_id=2140 Buy decent media, not el cheapo junk like this. We recommend ONLY high quality Taiyo Yuden or Verbatim media. Regards

Read pink bit at top Plus a search will reveal at least 20 recent threads on xbox360 games. Regards

That is one terrific (first) post quietbritishjim. So often, what you find in a support forum are simply questions as to why things went wrong (which we are here to answer, of course), or uneducated minds blaming the program for the ails of their (burning) life, as well as dredging up old suggestions over and over again that the author has said he doesn't want to implement and requests for new features to make ImgBurn look work like Ner0 () Of course, there's plenty of nice words like yours, too, and for those, we are all very grateful. Regards

Unless it's not a cell/ECC boundary perhaps (the latter is obviously OK)? Regards

Ask your customer - he probably couldn't care less if VTS 18 is on layer 0 or 1 and is swapped with VTS 19 for example. Another option is to move VTS 18 closer in on layer 0 (make it VTS 1 for example - this should create lots of breaks in what are now VTS 17 and below by the looks of the sizes of the VTSs). Again - and even recognising that at the elementary stream level, everything in a mux is interleaved - if it were me, I'd not put a layer break anywhere near ILVU material. You just don't want the player going back and forwards across the break lots of times, just to play a single cell. This is especially so given your customer is unlikely to make the break seamless. Anyway, from your picture, there should be the possibility of breaking at VTS_18_0.IFO, which is at 2,032,135, placing all of VTS 18 on L1. This is, by far, the best outcome. Regards

Since when did this board turn into a place for political diatribe? Help. Regards

Do it at the start of any VTS, if possible. If you can't find a good LB point, apart from splitting cells, you can remap the titlesets. Do this with PgcEdit. It's almost a one step process - just decide which VTSs should be in layer 0 and move them around. Regards

No - invest another 30 cents in a new blank. Regards

Could be anything - your drive, cables, DMA or just a bung disc. Maybe try different firmware - http://forum.rpc1.org/dl_firmware.php?download_id=2313 Regards

PTP will tend to do that to you - it probably has L1 > L0. Have a look at the "End of the World" guide. Regards

If in PTP mode, you'll need to extract the files and rebuild. Regards

No, this is not a bad LB - it is a bad write. The drive can't read the disk. This is symptomatic of poor media. Do get the Verbatim, +R, 2.4x, MKM-001-00, Made in Singapore. Regards

You don't need to re-rip. Mount or extract the files from the ISO and use build mode. Regards

Look at Help --> ImgBurn Logs Regards

With systems getting faster, how big a data buffer would you have? It seems 2Mb is good enough for the vast majority of burning. Regards

Yes, there would, but if it happens at a fade out in video and audio, it might not be that noticeable. Clearly, you'll need to remaster the DVD. Regards

No, but the theory is the same. Regards

Yes. Do try with different media though. That RICOH stuff is not the best. Regards

2 things: 1. Get Verbatim, +R, 2.4x, MKM-001-00, Made in Singapore media and throw your current media away. 2. Update your firmware - http://forum.rpc1.org/dl_firmware.php?download_id=2005 As well, your burner is getting very long in the tooth. Keep an eye on it. Regards

What settings did you have in the Options tab of build mode (only recurse subdirectories should be ticked - same as for DVD Video)? As well, maybe your player doesn't like the media? We recommend high quality Verbatim or Taiyo Yuden media. Regards

Again, do a scan and see how the discs look. Regards

Then some running process has a handle on it. Use Process Explorer to find out which. Regards