chewy

the 2 or 3 raidmax's I have seen had issues within a year or few months they claim +12V@28A but Hold-up Time >10ms at full load whereas the coolmax(not that good a brand) +12V1@18A, +12V2@18A they would be a little more conservative http://www.coolmaxusa.com/productDetailsPo...category=single the connectors tell a lot too

I would go with a 2.6 windsor or even a 2.5 brisbane core, the 6000 is pushed to it's limits already with heat and power issues better power supply since you are using 4 ide's you will need a good power supply http://www.newegg.com/Product/Product.aspx...N82E16811119068 http://www.newegg.com/Product/Product.aspx...N82E16817159040 compare to the raidmax power http://www.newegg.com/Product/Product.aspx...N82E16817152029

try my controls(top) in your control panel options(bottom left) email settings uncheck

http://www.imdb.com/title/tt0108065/ to get into the mentality a kibitz

Duh!

ImgBurn Support Forum > Other > Chat now hijacking is another matter

I would suspect that the flash update got hosed, I doubt it was the firmware used but the technique and the way the hardware is configured I prefer to flash with the dvd burner as standalone master on the secondary ide(if there are 2) in safe mode so I can be sure the drive is in pio not dma(those durn liteons go to dma 4).

well my ddr500 will go to 270 mem bus if I turn off 1T command rate 43.9ns latency

2-3-3-6 should be stock spd at 400 for corsair xms? I couldn't get any overclock out of my cas 2 ddr 400 ram, but then I was pushing the durn HT too high

from the tests I have seen, adding the extra L2 to the windsor core gave neglible performance increases, amd's onboard memory controller is very efficient already. @Blu, is your cas 2 ram running at stock mem frequency with the 25% OC to fsb? ran into some references to changing from 1T command rate to 2T to enable pushing the fsb/mem freq envelope further

I thought you were supposed to get married last year? still planning a big honeymoon?

have you applied the chipset inf patch/driver? it's fairly new also have you updated vista, there were some patches to address that legacy ide driver there's another strange setting in power management acpi for ide/raid

http://forum.rpc1.org/dl_firmware.php?download_id=2012 is that an external hp dvd burner?

just to test I would have the pioneer as master with the other drive disconnected(power and pata cable) make sure the dvd burner is connected to a power lead that goes straight to the power supply

the log shows 1,0,0 screenshot shows 1,1,0 are the jumpers correct on the optical drives master for top drive at end of cable and slave for middle of cable? there are new inf drivers for that mobo

2 hard drives, 2 dvd burners, all on seperate cables, standalone masters sata or pata doesn't really matter same iso or different ones neither 8x works fine one hard drive, one iso still has to be read twice, and 4X is about all she wrote drive read heads are working their butt off

if it works and imgburn doesn't, wonder if it is loading any filter drivers that interfer?

imgburn has this great feature called filter driver load order

I am the idiot that told everyone during the first gulf conflict that this had nothing to do with OIL conclusion, everything the house of bush and saud does has to do with oil color me pinko michael moore

or buy a divx capable player and save yourself a lot of time

I just saw this problem with your log chewy... you don't think I would chance one of my last verbatims in an 8x cof test do you? sh!te I even forgot to lower the burn speed to 4x

I 20:30:51 ImgBurn Version 2.3.2.0 started! I 20:30:51 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 20:30:51 Total Physical Memory: 523,764 KB - Available: 320,608 KB I 20:30:51 Initialising SPTI... I 20:30:51 Searching for SCSI / ATAPI devices... I 20:30:55 Found 2 DVD

http://www.nliteos.com/ probably a lot more options that you want but it will make a iso for you

page 2 had some decent burns that hit 16x, even by a noob of course the purpose of the thread was not burn as fast as possible, but to have good burns in a timely manner

I always wondered about that pause at the end of burn, so the laser goes back to inner tracks? pardon my stupidity