Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by Groundrush

  1. Sorry guys but i can't find the disks, i can only pressume that my G/F packed them as she returned to the US this morning(she bought them with her to try out). On a side note what is the purpose of a PIPO scan, I've seen " the old" post these on many occasions but don't quite understand the meaning. Any chance of a quick explination.....Thanks
  2. Hey guys, been messing around with the new version of ImgBurn(thanks Lightning UK) and had a couple of sample dvds which i thought I'd use. The writing phase went without incident but when it came to verify both disks ceased at around 1.5 / 2GB mark. The disks are blank faced but have a MCC ID so i presume they ok, any ideas as to why they are unable to verify. Thanks in advance. I'll add the DVD PRO image and also a log file I 16:29:55 ImgBurn Version started! I 16:29:55 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 16:29:55 Initialising SPTI... I 16:29:55 Searching for SCSI / ATAPI devices... I 16:29:56 Found 1 DVD-ROM, 1 DVD+RW and 1 DVD?RW! I 16:30:38 Operation Started! I 16:30:38 Source File: C:\Compressed\DVD.ISO I 16:30:38 Source File Sectors: 2,285,857 (MODE1/2048) I 16:30:38 Source File Size: 4,681,435,136 bytes I 16:30:38 Source File Volume Identifier: DVD I 16:30:38 Source File Implementation Identifier: DVD Shrink I 16:30:38 Source File UDF Revision: 1.02 I 16:30:38 Destination Device: [0:0:0] LITE-ON DVDRW SHW-1635S YS0X (F:) (USB) I 16:30:38 Destination Media Type: DVD-R (Disc ID: MCC 02RG20) (Speeds: 4x, 6x, 8x) I 16:30:38 Destination Media Sectors: 2,298,496 I 16:30:38 Write Mode: DVD I 16:30:38 Write Type: DAO I 16:30:38 Write Speed: 8x I 16:30:38 Link Size: Auto I 16:30:39 Test Mode: No I 16:30:39 BURN-Proof: Enabled I 16:30:39 Filling Buffer... I 16:30:40 Writing LeadIn... I 16:31:30 Writing Image... I 16:41:07 Synchronising Cache... I 16:41:25 Operation Successfully Completed! - Duration: 00:10:47 I 16:41:25 Average Write Rate: 7,937 KB/s (5.7x) - Maximum Write Rate: 8,380 KB/s (6.1x) I 16:41:25 Cycling Tray before Verify... W 16:41:34 Waiting for device to become ready... I 16:42:55 Device Ready! I 16:42:56 Operation Started! I 16:42:56 Source Device: [0:0:0] LITE-ON DVDRW SHW-1635S YS0X (F:) (USB) I 16:42:56 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 02RG20) (Speeds: 4x, 6x, 8x) I 16:42:56 Image File: C:\Compressed\DVD.ISO I 16:42:56 Image File Sectors: 2,285,857 (MODE1/2048) I 16:42:56 Image File Size: 4,681,435,136 bytes I 16:42:56 Image File Volume Identifier: DVD I 16:42:56 Image File Implementation Identifier: DVD Shrink I 16:42:56 Image File UDF Revision: 1.02 I 16:42:56 Verifying Sectors... E 16:49:01 Failed to read Sector 891744 - L-EC Uncorrectable Error E 16:49:01 Failed to Verify Sectors! E 16:49:01 Operation Failed! - Duration: 00:06:05 I 16:49:02 Average Verify Rate: 4,886 KB/s (3.5x) - Maximum Verify Rate: 11,440 KB/s (8.3x)
  3. Thanks Lightening, Shamus.I tried both and both work fine. I appreciate your input in solving a problem no doubt i caused somewhere along the lines and forgive me for thinking it was a bug within ImgBurn.
  4. Thanks Lightening UK, did as requested and works fine with IE. I know this is really cheeky but can you point me in the right direction in where to find the path for Firefox so i can do the same, change the command to open Firefox instead of IE. Again many thanks Lightening, LFCrule, Volvo and Shamus for all you help and input.
  5. @ Lightening UK, thanks for the prompt reply. I've set IE back to the default browser and still no luck with any link. The Reg' entry says I'm running my portable Firefox..... E:\FOLDER~2\LOCKER\PORTAB~1\FIREFOX\FIREFOX.EXE -url "%1" where i know it should be running from my C: drive. Any help in changing the value back to what i should be would be most helpful as this is quite beyond and mere mortal like me . Also when i paste it into the Run window i get a message up " Windows can not read from the disk, disk may be corrupted, may be using a format not compatible with Windows" or words to that effect.
  6. Sorry Lightening UK, i have edited the above post and found the correct Key.....forgive my haste. Just looking at the Reg' entry it looks wrong, i run a version of Portable Firefox from a flash drive (E:) so is this entry incorrect, should the program, the full version be running from ( C:) and not the portable version(E:).....???
  7. Hey, thanks guys i realize that It's probably something I've done to my laptop and not a bug in the system. I've had a look at the registry and found the reference to the key specified, would this cause the problem of not opening the links, this a shot of the registry and does it look right or wrong. If this is causing the problem any ideas how to solve the problem. Thanks.
  8. Hi Lightening UK I currently have Firefox set as my default browser and rarely use IE except for Microsoft updates. When clicking on any of the links i get nothing, no response. Neither browser opens regardless of what link i chose, i just have the ImgBurn GUI and sub menu. Cheers in advance.
  9. Somehow I don't think you meant that !!! ? ha ha ha ha, you two are unreal....... =))
  10. Welcome back, i was the same too when i found ImgBurn by chance and joined the forum only to see all those fimiliar names and avatars which hadn't lost any of their humor or witt....
  11. Hi Lightening UK, Forgive me if this is the wrong place to post this but as in the Beta i am still unable to check for firmware updates, in fact while i have the app' open I'm currently unable to open any link from within the program i.e. visit forum, home page or make a donation. I'm running Zone Alarm security suite and the fire wall is configured to allow Internet access to ImgBurn and also for it to act as a server. I know last time i contacted you RPC 1 was undergoing a few tweaks but since then I've been unable to access the site via ImgBurn and have to go there or the forum manually. Regards......
  12. I've been away for the weekend so missed getting my hands on the new release till now, I'm back now and looking forward to putting though It's paces......... thanks Lightning UK
  13. I suffer the same problem on my Laptop running an external drive via USB, after much advice and testing/trouble shooting, i now burn everything with all non essential applications/prgrams shut down. This works for me. http://forum.imgburn.com/index.php?showtopic=1176#
  14. lfcrule1972.... this is the best laugh i've had all day................I know, simple things / simple minds.......
  15. A belated HAPPY BIRTHDAY BOSS, I'll charge a glass in your honor
  16. I spend a lot of time in the USA, and when US immigration finally get round to issuing my visa, that's where I'll be residing. Basically I'm going to have to revert back to non metric which i know will confuse the hell out of an old dog like me........
  17. They say curiosity killed the cat, well mine killed my HDD (twice). Perhaps i should just let things do what they are supposed to and not try to understand how or why they work as they do......!!! As for DB, from what I've read there is no way I'm going to relieve him of his hardware destruction crown :
  18. Thanks guy's....... Some how HDD's and i don't mix, :whistling:i burnt out my last one a couple of months back so had to replace it, now i manage to wipe the lot on this one. @...Flawless115, thanks that was the one i found before but couldn't this time..... @...Kevdriver, honest i didn't press ENTER... @...lfcrule1972, it must be coincidence that i fried my last HHD on a weekend
  19. Hey guys/gals, i managed to delete the whole contents of my HDD at the weekend (don't ask ) so i'm currentley re-installing all the software i had, the only problem i have is finding a copy of DVDShrink that will support ImgBurn. I had it, but for the life of me i've hunted high and low on the net but it's eluding me. Or is it more to the point i can't see the wood for the trees....... Any way i would be ever so greatful if some one would point me in the right direction. I'm not being lazy as I'll keep looking and if i come across it in the mean time I'll let you know.
  20. Hi volvofl10, It's through USB 2.0, i still can't complain as my burns are averaging around 10 minutes even with the drop off, but i shall take your advice and try running at 6x to see what results i get..... Cheers.....
  21. Ok job done....I'll run a few burns during the week and see how things pan out........ Thanks LUK.
  22. Cheers LUK, i have one question. As i said, after running D/shrink ImgBurn opens automatically ready to burn as i followed jmet's guide to do so. This opens v1.2.0.0 and not the beta, to open that i have to use the desktop icon. Do i need to uninstall both versions and then re-install the beta and again follow jmet's guide to configure it accordingly, i'd have thought the old version would have been overwritten by the new one..? Forgive my lack of knowledge in the programing department , I'm doing my best to learn this as we go along. Thanks again.
  23. Damn you're good....LoL, i did note down the drop off was at 48% on #1. I had task manager in the system try keeping an eye on the cpu usage and i do not remember it spiking at any point.....Any way what you suggest is a small price to pay until i upgrade to a new desktop. Off topic, should i revert back to using the v1.2.0.0 or continue using the beta....? Thanks for all your help LUK.
  24. Many happy returns of the day........
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.