cornholio7

http://forum.imgburn.com/index.php?showtopic=2310 here is a set of burns/scans on this media

grab some verbatim discs, those ritek's aren't very good

please post the log

if you can read them back to your hdd, then you can reburn them , other than that , its a case of starting again

you could use verify mode to check if the disc is readable, check the graph , afterwards to see if the read was a smooth curve using dvd infopro of course, you can't verify against the original image

this looks very wrong

try updating your firmware to A306 from here http://forum.rpc1.org/dl_firmware.php?download_id=1923 you should have chosen the .dvd file and not the .iso file i believe the 2,4x discs are a more consistent disc, if you can swap those you have for the others i would

if its shown in the tooltip , it will be shown in the log too check the log in this post for an example http://forum.imgburn.com/index.php?s=&...ost&p=53058

you better run the device driver disc you got with the mobo

have you loaded the drivers for the mobo ?, if its an intel chipset , then things will improve when you install the acceleration drivers

yes its not good media , try verbatim MKM-001-00

why not post a log of your failed burns and we will try and help you to get imgburn to work on your pc? you can find your logs under help->imgburn logs

assuming you are trying to burn to single layer then buy a dual layer disc.

post a log please. help->imgburn logs

http://forum.imgburn.com/index.php?showforum=4 take a look here see if these help

imgburn and wmp covers my burning needs

it's not something we will discuss on this forum.

we need to see the info highlighted in yellow please copy and paste it all like this BENQ DVD DD DW1640 BSRB (ATA) Current Profile: DVD-R Disc Information: Status: Complete Erasable: No Sessions: 1 Sectors: 2.288.416 Size: 4.686.675.968 bytes Time: 508:34:16 (MM:SS:FF) Supported Write Speeds: 4x TOC Information: Session 1... -> Track 01 (Mode 1, LBA: 0 - 2288415) -> LeadOut (LBA: 2288416) Pre-recorded Information: Manufacturer ID: RITEKG04 Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.485.005 Last Physical Sector in Layer 0: 0

åbn imgburn i write mode og kopier alt data fra højre siden og paste det i din næste svar

nobody has said it yet so i would add that the quality score could look very different if jitter was measured so the overall qs is not totally accurate for dvdip

personally , i always get these http://svp.co.uk/products-solo.php?pid=164&prepg=3 never had a problem with them

hi and welcome to the board, you have some inferior discs, try looking for genuine taiyo yuden or verbatim discs

still need f6 with raid in vista

check the faq about that http://forum.imgburn.com/index.php?s=&...dpost&p=975

i would be suspecting the burner, there are lots of cheap drives out there these days, you can pick a decent drive up for £30