cornholio7

is it an nec burner?

did you have verify ticked?

its an authoring problem

check your dma, follow the instructions in this post http://forum.imgburn.com/index.php?s=&...dpost&p=967 try backing down to 8x when you have checked dma and try burning again

13:42:03 Found 1 DVD-ROM and 1 DVD-ROM/CD-RW! have you connected the new drive correctly as only a cd writer is showing?

are you sure the mobo is usb2? how old is the pc? just trying to find out more info to help you

imgburn nor any of the members can help you with ripping, you are advised to look elsewhere - sorry.

imgburn cant help you with protected discs.

then i suggest you contact who you bought it from as imgburn is freeware

missed your humour dude

hello mate, nice to see you

hi widow, nice to see you around again, now if we could only pry snazz away from wow

personally i would drop the burn speed to 8x and buy some other discs, verbatim and taiyo yuden are all i use, CMC have a tendency to be unreadable after a short time, lots of users here cant even burn to them.

please dont cross post , it gets confusing

probably, try it and let us know

sorry , but a complete log of a completed burn please

can you post a log please?

are your drive and hdd connected via an usb 2.0 hub?

CMC MAG is the dye used on the discs you have, it could be two different 'producers' name on the disc (for example memorex/datawrite) you should buy yourself some verbatim or taiyo yuden discs to assure that you can watch your dvd in future, as cmc's have a tendency to degrade quickly. look in the drives and media section to see the different dye types for verbatim and taiyo yuden discs

you are putting the discs in the burner and not in the rom? the warning you are getting for drive G is just info to let you know not to try to move files of over 4gb onto it, as the limit for fat32 file system is just under 4gb

it will make a difference , it being in pio mode was causing the slow burns , now the next problem should not be speed but the cmc mags you are trying to burn to let us know how you get on

did you delete the controller and reboot as described in the faq?

follow the instructions in this post http://forum.imgburn.com/index.php?s=&...dpost&p=967 then buy some verbatim or taiyo yuden discs, it should help

any chance you could post a log from imgburn please? help->imgburn logs

before you invest in new equipment try verbatim and taiyo yuden discs on all your players. typically cheaper discs cause the pixellating you describe , and its cheaper to get good discs than new players