dontasciime

Exactly. Although he will come on and say no its firewire

did you you say your using an external hard drive to read file from ?

Dunno why they don't just sell you a dvd player with the film built into rom and be done with it.

I have used them quite a few times over 3 years, had no problems. Spend over ?250 and you get free nex day delivery if ordered b4 4pm

ukdvdr

yeah its tyg03 and i will be burning them at 8 anyways, ?6.99 for 25. might get 100 of them. Usually just get cheaper stuff as 4 year old dvds still play fine for me. Saying that 28 for 100 is still cheap considering first lot of 25 discs i bought cost me 25 quid. Not that i need any blanks just fancy buying something.

Anyone tried these, ne good ? thanks

not showing for me in uk, unless your in states.

Won't be so bad if they keep same hardware and only badge changes. Lots of takeovers this year.

I think that drive is really a liteon 1693s

Train the dogs to go after the real criminals the MPAA.

Yep, I just asked freecom if they would sell me one barebones, without hard drive etc and they said NO I might tell them to shove it up their arse then and see if they send me one for free

http://www.freecom.com/news.asp?id=4976&catName=press

I can Well as long as i kind find my marker pen.

don't overburn. Make whatever it is your burning smaller so it fits on the disc as no way are you gonna fit 3,000+ sectors onto your discs

1080P is a good upgrade but i still wish they would sort out their crap protocol for live. OK if you have one 360 and a gold subscription, not so good if you have 2 360 and 2 gold subscription. As you can only pass one port per internal IP, therefore you cannot achieve OPEN on both 360's when both are connected to live. Easily fixed as well on ms behalf if they would just add another port, IE 3074 is the one they use they should at least add 3075, tbh they should have range from 3074 to at least 3080.

Seagate took over Maxtor.

Hows that for service.

Anyone on here running This intel chipset ICH7 with sata 2 hard drives using AHCI or even IDE /AUTO/COMBINED/ENHANCED etc. If you are what udma are your sata 150/300 drives currently using listed in device manager under IDE/ATA/ATAPI Controller. If you run nero info tool under configuration does it also list some of your sata drives as having DMA off. Thanks

Or just buy a Maxtor drive.

Tested the I-ram a little further this time with build mode and shrink Limited use this I-ram thing and too dear at that, as reading source is too slow for i-ram's capabilities. Eg copying file from any of my sata2 hd's to i ram tops out at sata 2 drives max sustained read rate. Same applies going from I-ram to any of my sata2 hd's this time hd's max sustainable write rate. However using I-ram as source for shrink to process encode etc is where i get to see some real benefit at a rate of 153,776k a second to 176,863 k a second, still limited to just under dvd-5 size encoding though ie 3.99 gig etc. Imgburn build mode when files are stored on I-ram is also pretty stunning, though am limited to just under 2 gig source and just under 2 gig store. If i bought another and another 4 gig of pc1600 memory it would be lightning fast. log file for build mode to I-ram below.

I have the acronis one in fact i got quite a few that will do the job. I just like / trust the ontrack one, well the specific versions for each of my diff manufacturers hard drives. As the one i bought will do any. Thanks

Ok i bought this program tonight, as i used to use the free version each drive manufacturer provided. I bought it cos samsung/hitachi/fujitsu no longer provide this tool, and i was having issues with partition magic 8. Anyways i presumed it would allow me to create a dos version to prepare 2 sata2 hard drives a samsung 300 gig and hitachi 200 gig It only creates bootable floppy disc, now this would not be problem as i can use nero or imgburn to create ISO. Heres the problem though, it creates 2 floppy discs, the only difference with floppy 2 is DMZIP2, which is not on floppy one as floppy 1 is not big enough. There is nothing on floppy one i can delete to then put dmzip2 on. Am i missing the obvious here, or is there a way imgburn can sort this out. Long day, headache and tbh had enough been shitty day got ripped off with 4 gig of crappy memory from ebay as well thanks

cheers

those links working to anyone ?