mmalves

ISOREAD was the old name, which is now /MODE READ so that it matches the program's modes in the graphical interface. The /SPEED switch only works for setting the write speed. The program will use the read speeds configured in the Read mode screen, so you can set it to the speed you want then close ImgBurn, and when you call ImgBurn to read your disc, it'll use those speeds.

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. Also check your HDD fragmentation and avoid using the computer while burning.

Try burning at 6x or 8x, and if that doesn't work then read this -> http://forum.imgburn.com/index.php?showtopic=8000

Please read this -> http://forum.imgburn.com/index.php?showtopic=12200 You should also read this -> http://forum.imgburn.com/index.php?showtopic=8000

It's a possibility

Windows downgrades to PIO mode if there are communication errors with the device, but it's quite dumb at that and sometimes it goes to PIO mode when it wasn't needed.

Original Wii game discs are protected and ImgBurn can't read protected discs.

Select one of the modes and those menu options shall become enabled. For the Changer menu to work you might need to enable the Enumerate Medium Changers in the program's settings.

You don't need to do anything for making 2.5.0.0 work. If you're having problems burning then start a new thread and post the log of such burn (look in ImgBurn's Help menu).

Your burner is in PIO mode, so read this post on how to solve it.

Your DVD+RW disc is stuffed or your burner doesn't like it. Do a Full Erase on that disc and try burning again. If it doesn't work then you'll need to buy a DVD+RW from another brand (Verbatim is very good).

Yes, this:

The device buffer is queried from the burner and can vary a lot depending on the burner. Can you post the log of a burn where that happened? Look in ImgBurn's Help menu.

http://forum.imgburn.com/index.php?showtopic=8000 It might also be worth looking for the latest drivers for your motherboard's chipset and/or storage controller(s). Use SIW to find their brand/model.

Get a new burner, the one you have is jurassic and doesn't support the blanks you're using.

Please post the log from when you've burned with Verbatim or Taiyo Yuden blanks.

Try with Verbatim or Taiyo Yuden blanks. If it doesn't work at first then try a lens cleaning disc on that burner.

The donation button is right this way -> http://www.imgburn.com/

Please read the pink banner at the top of this page (i.e. post the log of that burn).

ImgBurn is freeware and never claimed to copy protected discs. If you paid for it you were ripped off.

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished). Burn at 8x or 12x, or 16x if you want the fastest reliable speed. If it still does that then try a lens cleaning disc on your burner.

You didn't use the Search button or else you'd have found this thread

Update ImgBurn. Try burning at 4x or 6x. If it doesn't work then try a lens cleaning disc on that burner.

ImgBurn doesn't convert anything, the file was burned as it is. I guess you need a BD authoring program to do what you want.

http://forum.imgburn.com/index.php?showtopic=12200