cornholio7

personally i dont use next write , i set dual layer +r media to always be rom always verify your burns and the log will confirm the booktype under verification I 17:55:28 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2,4x; 4x; 6x; 8x)

just change the booktype to rom before burning as long as your burner supports bitsetting

check the faq about dma http://forum.imgburn.com/index.php?s=&...dpost&p=967

1= spinningwheel 2= kenadjian 3= digidragon 4= polopony 5= dontasciime 6= lightning uk 7= grain 8= kevdriver 9= lfcrule 10= cornholio 11= shamus mcfartfinger 12= blutach 13= dbminter some of the the beta team maybe?

take a look here http://forum.imgburn.com/index.php?s=&...dpost&p=975

looks a bit like dma issues, check out the FAQ here about fixing dma and see if it helps

and another new version to boot

does this help?

ok what is your drive?

did you change the booktype to -ROM?

no , the drive would show all supported speeds and 8x should be supported for those discs if they are real verbs try the firmware update and see what speed is supported then

maybe you should try a lens cleaner too, it may help

choose test mode so you dont waste a disc

do you have a copy of the log please?

i'm miss piggy apparently

buy some decent discs. verbatim or taiyo yuden, then burn at 8x for best results

the solution to pio mode is in the faq as per post #37

have you tried verbatim dual layer discs?

have a good day mate

i had a pair of headphones like that once

blue line speed, bottom line purple, rpm

depending on how old the drive is, try a lens cleaner too

try using verbatim CMC arent very good

what discs are you using? , please post the rest of the log