LIGHTNING UK!

You've already tried burning to that disc and it failed. Use a new one.

hambone, is this even your thread?! If not, make you own and don't hijack this one. Make sure you do as mmalves said and post the complete log of a failed burn.

Post the full log please. Go into the settings and turn off the 'perform opc' option. Put the 'Write Type' back on DAO/SAO.

I'd go with some SATA if I were you. That way you don't need to worry about master / slave or problems when trying to use 2 devices at the same time (that share the same cable). From that list, I've got an AD-7203S and a DVR-216 in my computer if that makes any difference. Samsung wise I have the SH-S223F and LG wise I have the GGW-H20L (but that's a bluray burner). A new LiteOn iHASxxx model is also an option. I have a iHAS120 in my machine at the moment but I'll no doubt update that when the iHAS3xx and iHAS4xx ones are available.

Update the firmware on your drive too, BCIB is the latest one (and the one you should be running).

We hate people with ideas

Always using Memorex doesn't mean anything. They're a brand name, not a manufacturer. The dye they use for their discs could change every week and your drive/firmware doesn't like the one they're currently using - RITEK-S04-66.

It's nothing to do with the controller. Burning errors come from bad drive/media/firmware combos. The media you're using is good stuff but the ones made in India aren't as good as the other two. If the firmware has been setup for the Singapore stuff, it could indeed have problems with the lower quality stuff from India. So basically what I'd do now if I were you is find some made in Singapore and try those. The proper 2.4x discs with the MKM-001-00 dye works better for some people than the 8x MKM-003-00 ones so try getting some of those instead. If it still can't burn to those I'd just return it under warranty. Just because it burns single layer discs ok doesn't mean it's not faulty.

The 3rd drive is probably a virtual one or something. Buy yourself a new burner as mmalves said.

You'd only get that if the image would actually fit on the first layer. The layers on a DL disc are smaller than a normal single layer disc.

Copy + paste everything from the log window please.

Maybe your drive is faulty? Have you tried burning at a faster speed? That stuff is designed for 8x burning. The fact that pioneer allow you to 'overspeed' to 10x probably means they do more testing at 4x, 8x and 10x than at the mega slow speeds. Where are those Verbatims made? Singapore? India? Taiwan?

That's to be expected if the drive bit finishes instantly.

Do the same for that as for the mp4 file then. You can probably do them both at the same time so they end up on 1 dvd, haven't ever used DVD Flick myself so I don't know.

Maybe the drive part finished really quickly then and all you had to wait for was the ImgBurn bit.

The Wii drive isn't built for reading writable discs at all, using REwritable discs is probably just asking for trouble because they're never as good / readable as write once media.

I'm sure I mentioned before that the format is a 2 part process. The first is done by the drive and the % complete is read from the drive - ImgBurn just polls it every second. The second is ImgBurn writing zeroes to all the sectors because the bit done by the drive doesn't appear to do that (unlike when formatting DVD+RW). So yes, the % complete would count up twice.

There's no way to tell unless you try with media that's known to be 'good'. If the verbs and/or taiyo yudens don't work, try cleaning the drive with a cleaning disc and then try burning again. If that still doesn't work I guess you'll need to speak with whoever supplied your machine.

Jmicron is just the most common one, I was guessing really. It could be marvel or silicon image too. You have to look at the hardware identifier of the device and then you can lookup what it is via google by searching for the vendor and device id codes. To do that, bring up properties on the device, switch to the details tab and select 'hardware ids' in the drop down list.

The problem is your drive/firmware/media combo. Goto the plextor website and update your firmware to 1.12.

It would use layer 0 and layer 1 though on DL media, and being an ISO I can't do anything in the way of padding. So the message is technically correct. If you want to burn it to DL, extract/mount the image and then rebuild it (direct to disc or it'll just make another single layer ISO) from the video_ts folder/ifo,bup,vob files.

Try cleaning the drive maybe? Failing that you'll have to get another spindle of discs.

I've never even seen that dye before, get yourself some decent Taiyo Yuden / Verbatim discs.

Windows is complaining. Try a motherboard bios update and also update the drivers for whichever chipset your motherboard uses - i.e. Intel or nvidia.

Moved