LOCOENG
Beta Team Members-
Posts
1,965 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by LOCOENG
-
You are on the same hours I am.....enjoy.
-
Must be the lack of EZ picker mode that makes it easy to use.... @Chala I'd give the new version a go, you can always downgrade.
-
First I'd update to 2.4.0.0 as it is the supported version now. Go to Tools/Settings/Build tab and untick the "Remember MRU tab" option in the lower right corner and then press OK.
-
4 DL's and 2 DVD's wasted, same error all the time...
LOCOENG replied to Zartok's topic in ImgBurn Support
It's pure chaos at AD...makes me want to be a console kiddie -
Optimum Power Calibration Failed, Reason: Write Protected
LOCOENG replied to TURGUT's topic in ImgBurn Support
Don't get him started again Blu -
I think you must have got a head start as well
-
No Mac version is planned....now or later. http://forum.imgburn.com/index.php?showtopic=4959 EDIT: Who is the slow poke now?
-
4 DL's and 2 DVD's wasted, same error all the time...
LOCOENG replied to Zartok's topic in ImgBurn Support
Apparently that is where the LB needs to be in order to burn these wii games Blu....go figure, but this certainly isn't an isolated event. Against my better judgement, some people have reported better success with Memorex media. http://forums.afterdawn.com/thread_view.cfm/618029 -
Trying to catch up with Cynthia Blu?
-
Now you tell us.
-
That for each BTM too, not the entire community.
-
Check your burner's manufacturers website to see if there is a firmware update for your drive. Did you look into the DMA issue? You can try at 2.4X and see if there is a difference or I've read that some have actually had better luck with Memorex media...pah
-
http://forums.afterdawn.com/thread_view.cfm/618029 Check the FAQ to see that DMA is enabled.
-
Hope it works out for you...good luck.
-
Try this.... http://www.goldenpenproductions.com/Loopin...from_a_Menu.pdf or this... http://www.tarnsyke.com/Geoff/Guides/Looping_Video.pdf
-
Nevermind the final times, I was messing with the system clock...for some reason it thinks it's 8:24 in the morning here. [04:57:41] One Click encoding activated... ----------------- [04:57:42] Phase I, PREPARATION started. - VTS_01: 3,604,975 sectors. -- Scanning and writing .D2V file -- Processed 200,517 frames. -- Building .AVS and .ECL files - VTS_02: 131,944 sectors. -- Scanning and writing .D2V file -- Processed 13,403 frames. -- Building .AVS and .ECL files - Reduction Level for DVD-5: 61.4% - Overall Bitrate : 3,510Kbs - Space for Video : 3,823,276KB - HIGH/LOW/AVERAGE Cell Bitrates: 8,808/1,950/3,510 Kbs [05:02:45] Phase I, PREPARATION completed in 5 minutes. [05:02:45] Phase II ENCODING started - Creating M2V for VTS_01 segment 0 - Creating M2V for VTS_01 segment 1 - Creating M2V for VTS_01 segment 2 - Creating M2V for VTS_01 segment 3 - Creating M2V for VTS_01 segment 4 - Creating M2V for VTS_01 segment 5 - Creating M2V for VTS_01 segment 6 - Creating M2V for VTS_01 segment 7 - Creating M2V for VTS_01 segment 8 - Creating M2V for VTS_01 segment 9 - Creating M2V for VTS_01 segment 10 - Creating M2V for VTS_01 segment 11 - Creating M2V for VTS_01 segment 12 - Creating M2V for VTS_01 segment 13 - Creating M2V for VTS_01 segment 14 - Creating M2V for VTS_01 segment 15 - Creating M2V for VTS_01 segment 16 - Creating M2V for VTS_01 segment 17 - Creating M2V for VTS_01 segment 18 - Creating M2V for VTS_01 segment 19 - Creating M2V for VTS_01 segment 20 - Creating M2V for VTS_01 segment 21 - Creating M2V for VTS_01 segment 22 - Creating M2V for VTS_01 segment 23 - Creating M2V for VTS_01 segment 24 - Creating M2V for VTS_01 segment 25 - Creating M2V for VTS_01 segment 26 - Creating M2V for VTS_01 segment 27 - Creating M2V for VTS_01 segment 28 - Creating M2V for VTS_01 segment 29 - Creating M2V for VTS_01 segment 30 - Creating M2V for VTS_01 segment 31 - Creating M2V for VTS_01 segment 32 - Creating M2V for VTS_01 segment 33 - Creating M2V for VTS_01 segment 34 - Creating M2V for VTS_01 segment 35 - Creating M2V for VTS_01 segment 36 - Creating M2V for VTS_01 segment 37 - Creating M2V for VTS_02 segment 0 - Creating M2V for VTS_02 segment 1 - Creating M2V for VTS_02 segment 2 - Creating M2V for VTS_02 segment 3 - Creating M2V for VTS_02 segment 4 - Creating M2V for VTS_02 segment 5 - Creating M2V for VTS_02 segment 6 [05:36:06] Phase II ENCODING completed in 34 minutes. [05:36:06] Phase III, REBUILD started. - Copying IFO, BUP, and unaltered files... - Processing VTS_01 - Reading/processing TMAP table... - Rebuilding segment 0 VOBID: 1 CELLID: 1 - Updating NAVPACKS for VOBID_01 - Rebuilding segment 1 VOBID: 2 CELLID: 1 - Updating NAVPACKS for VOBID_02 - Rebuilding segment 2 VOBID: 3 CELLID: 1 - Updating NAVPACKS for VOBID_03 - Rebuilding segment 3 VOBID: 4 CELLID: 1 - Updating NAVPACKS for VOBID_04 - Rebuilding segment 4 VOBID: 5 CELLID: 1 - Rebuilding segment 5 VOBID: 5 CELLID: 2 - Rebuilding segment 6 VOBID: 5 CELLID: 3 - Rebuilding segment 7 VOBID: 5 CELLID: 4 - Rebuilding segment 8 VOBID: 5 CELLID: 5 - Rebuilding segment 9 VOBID: 5 CELLID: 6 - Rebuilding segment 10 VOBID: 5 CELLID: 7 - Rebuilding segment 11 VOBID: 5 CELLID: 8 - Rebuilding segment 12 VOBID: 5 CELLID: 9 - Rebuilding segment 13 VOBID: 5 CELLID: 10 - Rebuilding segment 14 VOBID: 5 CELLID: 11 - Rebuilding segment 15 VOBID: 5 CELLID: 12 - Rebuilding segment 16 VOBID: 5 CELLID: 13 - Rebuilding segment 17 VOBID: 5 CELLID: 14 - Rebuilding segment 18 VOBID: 5 CELLID: 15 - Rebuilding segment 19 VOBID: 5 CELLID: 16 - Updating NAVPACKS for VOBID_05 - Rebuilding segment 20 VOBID: 6 CELLID: 1 - Rebuilding segment 21 VOBID: 6 CELLID: 2 - Rebuilding segment 22 VOBID: 6 CELLID: 3 - Rebuilding segment 23 VOBID: 6 CELLID: 4 - Rebuilding segment 24 VOBID: 6 CELLID: 5 - Updating NAVPACKS for VOBID_06 - Rebuilding segment 25 VOBID: 7 CELLID: 1 - Rebuilding segment 26 VOBID: 7 CELLID: 2 - Rebuilding segment 27 VOBID: 7 CELLID: 3 - Rebuilding segment 28 VOBID: 7 CELLID: 4 - Rebuilding segment 29 VOBID: 7 CELLID: 5 - Rebuilding segment 30 VOBID: 7 CELLID: 6 - Rebuilding segment 31 VOBID: 7 CELLID: 7 - Rebuilding segment 32 VOBID: 7 CELLID: 8 - Rebuilding segment 33 VOBID: 7 CELLID: 9 - Rebuilding segment 34 VOBID: 7 CELLID: 10 - Rebuilding segment 35 VOBID: 7 CELLID: 11 - Rebuilding segment 36 VOBID: 7 CELLID: 12 - Updating NAVPACKS for VOBID_07 - Rebuilding segment 37 VOBID: 8 CELLID: 1 - Updating NAVPACKS for VOBID_08 - Updated VTS_C_ADT. - Updated VTS_VOBU_ADMAP. - Updated IFO: VTS_01_0.IFO - Updating TMAP table... - Processing VTS_02 - Reading/processing TMAP table... - Rebuilding segment 0 VOBID: 1 CELLID: 1 - Updating NAVPACKS for VOBID_01 - Rebuilding segment 1 VOBID: 2 CELLID: 1 - Updating NAVPACKS for VOBID_02 - Rebuilding segment 2 VOBID: 3 CELLID: 1 - Updating NAVPACKS for VOBID_03 - Rebuilding segment 3 VOBID: 4 CELLID: 1 - Updating NAVPACKS for VOBID_04 - Rebuilding segment 4 VOBID: 5 CELLID: 1 - Updating NAVPACKS for VOBID_05 - Rebuilding segment 5 VOBID: 6 CELLID: 1 - Updating NAVPACKS for VOBID_06 - Rebuilding segment 6 VOBID: 7 CELLID: 1 - Updating NAVPACKS for VOBID_07 - Updated VTS_C_ADT. - Updated VTS_VOBU_ADMAP. - Updated IFO: VTS_02_0.IFO - Updating TMAP table... Correcting VTS Sectors... [08:17:54] Phase III, REBUILD completed in-2719 minutes.
-
Temp whilst preparing files, just getting started... Encoding.... Approx. 15 minutes in...43% complete Task Manager...
-
You mean like this? http://www.tweaktown.com/popImg.php?img=goforgold_04l.JPG
-
As mmalves suggested, either try some Verbatim MIS media or get a new burner.
-
That is from Everest....I saw it too, but I saw CPU-Z reported it correctly so I wasn't concerned.
-
The beast is loose and squeaking..... Computer: Operating System Microsoft Windows XP Professional OS Service Pack Service Pack 2 DirectX 4.09.00.0904 (DirectX 9.0c) Computer Name DESKTOP User Name shortridge Motherboard: CPU Type 2x , 2400 MHz (7 x 343) Motherboard Name Unknown Motherboard Chipset Unknown System Memory 2048 MB BIOS Type Award Modular (01/04/08) Communication Port Communications Port (COM1) Communication Port Printer Port (LPT1) Display: Video Adapter NVIDIA GeForce 8600 GT (256 MB) Monitor Compaq MV520 [15" CRT] (915BE48QHK70) Multimedia: Audio Adapter Realtek HD Audio output Storage: IDE Controller Intel(R) ICH9 2 port Serial ATA Storage Controller 2 - 2926 IDE Controller Intel(R) ICH9 4 port Serial ATA Storage Controller 1 - 2920 SCSI/RAID Controller GIGABYTE GBB36X Controller Disk Drive WDC WD7500AAKS-00RBA0 (698 GB, IDE) Disk Drive ST312081 4A SCSI Disk Device (111 GB) Disk Drive EPSON Stylus Storage USB Device Optical Drive TSSTcorp CDDVDW SH-S203B SMART Hard Disks Status OK Partitions: C: (NTFS) 14998 MB (14211 MB free) E: (NTFS) 99464 MB (92975 MB free) F: (NTFS) 715394 MB (703395 MB free) Total Size 810.4 GB (791.6 GB free) Input: Keyboard HID Keyboard Device Mouse HID-compliant MX310 Optical Mouse Network: Network Adapter Realtek RTL8168/8111 PCI-E Gigabit Ethernet NIC (192.168.1.2) Peripherals: USB1 Controller Intel(R) ICH9 Family USB Universal Host Controller - 2934 [NoDB] USB1 Controller Intel(R) ICH9 Family USB Universal Host Controller - 2935 [NoDB] USB1 Controller Intel(R) ICH9 Family USB Universal Host Controller - 2936 [NoDB] USB1 Controller Intel(R) ICH9 Family USB Universal Host Controller - 2937 [NoDB] USB1 Controller Intel(R) ICH9 Family USB Universal Host Controller - 2938 [NoDB] USB1 Controller Intel(R) ICH9 Family USB Universal Host Controller - 2939 [NoDB] USB2 Controller Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A [NoDB] USB2 Controller Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C [NoDB] USB Device USB Composite Device USB Device USB Composite Device USB Device USB Human Interface Device USB Device USB Human Interface Device USB Device USB Human Interface Device USB Device USB Mass Storage Device USB Device USB Printing Support HDD ST312081 4A SCSI Disk Device HDD ST3120814A Motherboard EP35-DS3R F2 Motherboard 01/04/2008-P35-ICH9-6A89OG0NC-00 Motherboard DMIMOBO: Gigabyte Technology Co., Ltd. EP35-DS3R Motherboard DMISYS: Gigabyte Technology Co., Ltd. EP35-DS3R Optical TSSTcorp CDDVDW SH-S203B PCI/AGP 10DE-0402: NVIDIA GeForce 8600 GT [NoDB] PCI/AGP 197B-2363: GIGABYTE GBB36X Controller [NoDB] PCI/AGP 8086-2916: Intel(R) ICH9R LPC Interface Controller - 2916 [NoDB] PCI/AGP 8086-2920: Intel(R) ICH9 4 port Serial ATA Storage Controller 1 - 2920 [NoDB] PCI/AGP 8086-2926: Intel(R) ICH9 2 port Serial ATA Storage Controller 2 - 2926 [NoDB] PCI/AGP 8086-2930: Intel(R) ICH9 Family SMBus Controller - 2930 [NoDB] PCI/AGP 8086-2934: Intel(R) ICH9 Family USB Universal Host Controller - 2934 [NoDB] PCI/AGP 8086-2935: Intel(R) ICH9 Family USB Universal Host Controller - 2935 [NoDB] PCI/AGP 8086-2936: Intel(R) ICH9 Family USB Universal Host Controller - 2936 [NoDB] PCI/AGP 8086-2937: Intel(R) ICH9 Family USB Universal Host Controller - 2937 [NoDB] PCI/AGP 8086-2938: Intel(R) ICH9 Family USB Universal Host Controller - 2938 [NoDB] PCI/AGP 8086-2939: Intel(R) ICH9 Family USB Universal Host Controller - 2939 [NoDB] PCI/AGP 8086-293A: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A [NoDB] PCI/AGP 8086-293C: Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C [NoDB] PCI/AGP 8086-293E: Microsoft UAA Bus Driver for High Definition Audio [NoDB] PCI/AGP 8086-2940: Intel(R) ICH9 Family PCI Express Root Port 1 - 2940 [NoDB] PCI/AGP 8086-2946: Intel(R) ICH9 Family PCI Express Root Port 4 - 2946 [NoDB] PCI/AGP 8086-2948: Intel(R) ICH9 Family PCI Express Root Port 5 - 2948 [NoDB] PCI/AGP 8086-29C0: Intel(R) G33/G31/P35 Express Chipset Processor to I/O Controller - 29C0 [NoDB] PCI/AGP 8086-29C1: Intel(R) G33/G31/P35 Express Chipset PCI Express Root Port - 29C1 [NoDB]
-
Any of these should be good... http://www.newegg.com/Product/Productcompa...N82E16827129017
-
Well spinner, if I was getting paid to get laid I'd still be broke