-
Posts
6,588 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Cynthia
-
Questions about PIPO Scanning and Quality Rating
Cynthia replied to Burnfreak888's topic in ImgBurn Support
Never tested any -R Verbs with TY code. So I have no clue. Will be getting some soon. The AD-7173A is not one of the best burners IMHO. But I think you should expect "decent" values if you burn it with your burner and scan it. Between 4x and 8x is normally where Optiarcs performs bests. For the air thing. My computer is a tower model where the side panel never found it's way back where it should be. Instead all of my hard disk are located on the floor outside the tower and there are no fans/coolings that makes any airflows on my burners. So I doubt that heat should be an issue for you. That burners can behave odd is for sure. I have a Pioneer 118 that I can't burn MKM-03-00 at 8x speed without a verify error. A guy in Stockholm can burn them with good results. Even tried other spindles from different countries, but no luck at 8x. -
If you added the .zip file after your initial post the 18th, it's a big chance he missed it. Better to post in a new post to get it to show up in the forum better.
-
Questions about PIPO Scanning and Quality Rating
Cynthia replied to Burnfreak888's topic in ImgBurn Support
If you have some regular Verbatim single layer disc you could burn one of these and scan it in the Sony to see if you get decent values with that scan compared to the ones I've posted in the Drive/Media section. That should give you a hint on how good it's of scanning. -
If the layer break is in the .dvd file it will be used by ImgBurn. You can just open up the .dvd file in Notepad or any other .txt file reader to see what's in that file.
-
I know. But that was the only 16x media from TY that I've tried and I had to answer something to his/her PM.
-
Could try the latest firmware. http://www.firmwarehq.com/Lite-On/SHW-1635S/files.html 6x is the lowest speed you can use with that media.
-
Did you try both speeds with that new firmware version?
-
-
The only time I've used genuine ones are from Verbatim +R 16x Made in Japan almost two years ago. They have been tricky to find for me after that, but I will get some of the 16x JVC packaged ones to try but I haven't got them yet. This are the scans from that time that I have and this was burnt with an Optiarc AD-7200A at 12x speed. This one with TSSTcorp CDDVDW SH-S223F SB00 (that firmware was a joke) at 12x speed. TSSTcorp CDDVDW SH-S223F SB00 at max speed 22x.
-
I would go for the 1.14 version.
-
There is a later firmware version. Now you have 1.13 installed. http://www.firmwarehq.com/Asus/DRW-1814BL/files.html
-
Questions about PIPO Scanning and Quality Rating
Cynthia replied to Burnfreak888's topic in ImgBurn Support
Is this true ??? I think this is relevant to my problem. If layer 1 starts from the outer area of discs then it would only make sense to have that spike as the dye quality at the outer area of discs is generally not good ??? Please CMIIW. Yes, it's OTP. There is an image of it here: http://books.google.se/books?id=ikxuL2aX9cAC&pg=PT248&lpg=PT248&dq=demystified+dvd+dual+layer&source=bl&ots=XwJV4E4MJP&sig=ciTp8nxFepRhdnbP8eH6KdHcJgM&hl=sv&ei=K2mpS9P1OtLh-QbAjqVr&sa=X&oi=book_result&ct=result&resnum=3&ved=0CBYQ6AEwAg#v=onepage&q=&f=false Maybe we had those spikes because we burned 8x rated discs at 4x ??? Had we burn them at 8x, we would have a better quality rating ??? Have you ever conduct tests burning MKM-03-00 at 8x and comparing it burned at 4x ??? Do you always burn MKM-03-00 at 4x ??? Did you get a lot of this spike around layer break when burning MKM-03-00 at 4x ??? What is your lowest level of tolerance for quality rating ??? I've burned that media code with all my burners at the speeds they support. Some likes it slower and some faster. You can find this media here at various speeds/burners combinations. You can also see the difference in results in using two different spindles. Some burners liked the other spindle better. So I do think that quality can vary even in the same spindle on DL media. I haven't fully added the burns on two other burners; the Pioneer 118 and Optiarc 7700. Will do that in the upcoming time. The lowest tolerance would be when I see red colors in the upper part of the scan window or if there is a spike really high that might even have turned into red color. Bad reading will for sure give you pixelations, freezing and funny jumps when you play such a disc. I was asked on another forum about a disc with green and yellow colors and if it would play without issues and I haven't seen any test in any forum about a "playable" test. The Discovery mode also makes unplayable discs so I need to burn some nice stuff to watch and see how well different levels of "crappy burns" really plays on a stand alone player. I got some nice cheap discs to test with. Just need to get the time for it. If you burn games and play it in a PC I think it will be easier to read "bad burns" as regular DVD readers are much better readers than the cheap stuff they put in DVD Video standalone players. http://forum.imgburn.com/index.php?showtopic=9541 No problems. Just hope I don't give you any wrong answers. Did you get another spindle to do a new burn with to see if the spike issue was on that burn also? -
DVDInfoPro can show it. Nero DiscSpeed will not show you the date but it will show you with what burner you burned the disc with (on DVD -R media) Yes. That would be nice to have all info about a disc in one menu item in the Tools menu.
-
My point was that you had the latest one already installed.
-
Questions about PIPO Scanning and Quality Rating
Cynthia replied to Burnfreak888's topic in ImgBurn Support
No idea. I once used an old SONY DVD RW DW-Q30A' drive, a re badged Lite-On SHW-1635S drive and that one performed well with scans and gave pretty much the same results as a later bought genuine Lite-On. I guess it was a game you burned. If it had been a DVD Video you could always have tried to play it assuming that there was video stuff at the layer break. I've looked through my old scans and found one similar to yours. One spindle was "not so good" and these two disc from two different spindles are burnt at the same speed/burner (Optiarc 7200)/firmware and used the same scanner and gave totally different results. Note the spike at the same spot that you also have. You could do a burn in the Discovery mode selecting all sectors and compare it to my burn at 4x with a disc from another spindle. The media I've used was from Singapore. -
These are the latest nVida chipsets. This is what you have now. http://www.nvidia.co.uk/object/nforce_vista_win7_64bit_15.49_uk.html Looks to me as you have the latest chipset drivers installed already for SATA. For the non SATA I can't really understand what brand that one is.
-
Media: JVC DVD+R Taiyo Yuden Premium Grade Branded 16x 4,7GB [YUDEN000 T03] Burnt with: Optiarc DVD RW AD-7200A 1.09 (USB) Optiarc DVD RW AD-7240S 1.03 (SATA) Optiarc DVD RW AD-7700S 1.03 (SATA) PIONEER DVD-RW DVR-118L 1.02 (ATA) Scanned with: ATAPI iHAS120 6 7L0M (SATA) Summary:
-
Media: JVC DVD-R Taiyo Yuden Premium Grade Branded 16x 4,7GB [TYG03] Burnt with: Optiarc DVD RW AD-7200A 1.09 (USB) Optiarc DVD RW AD-7240S 1.03 (SATA) Optiarc DVD RW AD-7700S 1.03 (SATA) PIONEER DVD-RW DVR-118L 1.02 (ATA) Scanned with: ATAPI iHAS120 6 7L0M (SATA) Summary:
-
You are not an idiot. There is something wrong with the file at that page. I'll fix it. You can just add the .zip ot the filename of the file you downloaded and it will be a working zip.file to extract. Edit: Fixed the FHQ issue.
-
Verbatim 8x DVD+R DL Full-face Printable [MKM-003-00] @ 6x Media Information: Optiarc DVD RW AD-7700S 1.03 (SATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4 173 824 Free Space: 8 547 991 552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2,4x; 4x; 6x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2 086 912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (ADIP - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (Last Recorded): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 3 324 KB/s (2,4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 5 540 KB/s (4x) Descriptor 3... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 8 310 KB/s (6x) Results: I 04:53:46 ImgBurn Version 2.5.1.0 started! I 04:53:46 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 04:53:46 Total Physical Memory: 8 387 704 KB - Available: 6 608 084 KB I 04:53:46 Initialising SPTI... I 04:53:46 Searching for SCSI / ATAPI devices... I 04:53:46 -> Drive 1 - Info: PIONEER DVD-RW DVR-115D 1.22 (E:) (ATA) I 04:53:46 -> Drive 2 - Info: PIONEER DVD-RW DVR-118L 1.02 (F:) (ATA) I 04:53:46 -> Drive 3 - Info: ATAPI iHAS120 6 7L0M (O:) (SATA) I 04:53:46 -> Drive 4 - Info: DVDFab Virtual Drive 1.0 (P:) (SCSI) I 04:53:46 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (R:) (SCSI) I 04:53:46 -> Drive 6 - Info: Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 04:53:46 -> Drive 7 - Info: PHANTOM DVD-RAM DVDR V10 88.0 (Q:) (SCSI) I 04:53:46 -> Drive 8 - Info: Optiarc DVD RW AD-7200A 1.09 (S:) (USB) I 04:53:46 Found 1 DVD±RW, 4 DVD±RW/RAMs, 2 BD-ROM/HD DVD-ROMs and 1 BD-RE! I 04:53:53 Operation Started! I 04:53:53 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 04:53:53 Source File Sectors: 4 173 824 (MODE1/2048) I 04:53:53 Source File Size: 8 547 991 552 bytes I 04:53:53 Source File Volume Identifier: DISCOVERY_IMAGE I 04:53:53 Source File File System(s): None I 04:53:53 Destination Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 04:53:53 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 04:53:53 Destination Media Sectors: 4 173 824 I 04:53:53 Write Mode: DVD I 04:53:53 Write Type: DAO I 04:53:53 Write Speed: 6x I 04:53:53 Link Size: Auto I 04:53:53 Lock Volume: Yes I 04:53:53 Test Mode: No I 04:53:53 OPC: Yes I 04:53:53 BURN-Proof: Enabled I 04:53:53 Write Speed Successfully Set! - Effective: 8 310 KB/s (6x) I 04:53:53 Book Type Setting: DVD-ROM I 04:53:59 Optimal L0 Data Zone Capacity: 2 086 912 I 04:53:59 Optimal L0 Data Zone Method: ECC Block Boundary I 04:54:00 Set L0 Data Zone Capacity Succeeded! I 04:54:01 Filling Buffer... (40 MB) I 04:54:01 Writing LeadIn... I 04:54:05 Writing Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 04:54:05 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 04:54:05 Writing Layer 0... (LBA: 0 - 2086911) I 05:07:09 Writing Layer 1... (LBA: 2086912 - 4173823) I 05:22:32 Synchronising Cache... I 05:22:33 Closing Track... I 05:22:47 Finalising Disc... I 05:23:43 Exporting Graph Data... I 05:23:43 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-18-MARS-2010_04-53_MKM-003-00_6x.ibg I 05:23:43 Export Successfully Completed! I 05:23:43 Operation Successfully Completed! - Duration: 00:29:50 I 05:23:43 Average Write Rate: 4 893 KB/s (3.5x) - Maximum Write Rate: 8 353 KB/s (6.0x) I 05:23:43 Cycling Tray before Verify... W 05:25:11 Waiting for device to become ready... I 05:25:23 Device Ready! I 05:25:26 Operation Started! I 05:25:26 Source Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 05:25:26 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 05:25:26 Image File: -==/\/[DISCOVERY IMAGE]\/\==- I 05:25:26 Image File Sectors: 4 173 824 (MODE1/2048) I 05:25:26 Image File Size: 8 547 991 552 bytes I 05:25:26 Image File Volume Identifier: DISCOVERY_IMAGE I 05:25:26 Image File File System(s): None I 05:25:26 Read Speed (Data/Audio): MAX / MAX I 05:25:26 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 05:25:26 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 05:25:26 Verifying Layer 0... (LBA: 0 - 2086911) I 05:34:26 Verifying Layer 1... (LBA: 2086912 - 4173823) I 05:43:29 Exporting Graph Data... I 05:43:29 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-18-MARS-2010_04-53_MKM-003-00_6x.ibg I 05:43:29 Export Successfully Completed! I 05:43:29 Operation Successfully Completed! - Duration: 00:17:58 I 05:43:29 Average Verify Rate: 7 743 KB/s (5.6x) - Maximum Verify Rate: 11 262 KB/s (8.1x) Scans: ATAPI iHAS120 6 7L0M (SATA)
-
Verbatim 8x DVD+R DL Full-face Printable [MKM-003-00] @ 4x Media Information: Optiarc DVD RW AD-7700S 1.03 (SATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4 173 824 Free Space: 8 547 991 552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2,4x; 4x; 6x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2 086 912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (ADIP - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (Last Recorded): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 3 324 KB/s (2,4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 5 540 KB/s (4x) Descriptor 3... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 8 310 KB/s (6x) Results: I 03:55:47 ImgBurn Version 2.5.1.0 started! I 03:55:47 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 03:55:47 Total Physical Memory: 8 387 704 KB - Available: 6 613 036 KB I 03:55:47 Initialising SPTI... I 03:55:47 Searching for SCSI / ATAPI devices... I 03:55:48 -> Drive 1 - Info: PIONEER DVD-RW DVR-115D 1.22 (E:) (ATA) I 03:55:48 -> Drive 2 - Info: PIONEER DVD-RW DVR-118L 1.02 (F:) (ATA) I 03:55:48 -> Drive 3 - Info: ATAPI iHAS120 6 7L0M (O:) (SATA) I 03:55:48 -> Drive 4 - Info: DVDFab Virtual Drive 1.0 (P:) (SCSI) I 03:55:48 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (R:) (SCSI) I 03:55:48 -> Drive 6 - Info: Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 03:55:48 -> Drive 7 - Info: PHANTOM DVD-RAM DVDR V10 88.0 (Q:) (SCSI) I 03:55:48 -> Drive 8 - Info: Optiarc DVD RW AD-7200A 1.09 (S:) (USB) I 03:55:48 Found 1 DVD±RW, 4 DVD±RW/RAMs, 2 BD-ROM/HD DVD-ROMs and 1 BD-RE! I 03:56:06 Operation Started! I 03:56:06 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 03:56:06 Source File Sectors: 4 173 824 (MODE1/2048) I 03:56:06 Source File Size: 8 547 991 552 bytes I 03:56:06 Source File Volume Identifier: DISCOVERY_IMAGE I 03:56:06 Source File File System(s): None I 03:56:06 Destination Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 03:56:06 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 03:56:06 Destination Media Sectors: 4 173 824 I 03:56:06 Write Mode: DVD I 03:56:06 Write Type: DAO I 03:56:06 Write Speed: 4x I 03:56:06 Link Size: Auto I 03:56:06 Lock Volume: Yes I 03:56:06 Test Mode: No I 03:56:06 OPC: Yes I 03:56:06 BURN-Proof: Enabled I 03:56:06 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x) I 03:56:06 Book Type Setting: DVD-ROM I 03:56:15 Optimal L0 Data Zone Capacity: 2 086 912 I 03:56:15 Optimal L0 Data Zone Method: ECC Block Boundary I 03:56:17 Set L0 Data Zone Capacity Succeeded! I 03:56:18 Filling Buffer... (40 MB) I 03:56:18 Writing LeadIn... I 03:56:22 Writing Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 03:56:22 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 03:56:22 Writing Layer 0... (LBA: 0 - 2086911) I 04:11:33 Writing Layer 1... (LBA: 2086912 - 4173823) I 04:26:56 Synchronising Cache... I 04:26:57 Closing Track... I 04:27:11 Finalising Disc... I 04:28:12 Exporting Graph Data... I 04:28:12 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-18-MARS-2010_03-56_MKM-003-00_4x.ibg I 04:28:12 Export Successfully Completed! I 04:28:12 Operation Successfully Completed! - Duration: 00:32:05 I 04:28:12 Average Write Rate: 4 554 KB/s (3.3x) - Maximum Write Rate: 5 789 KB/s (4.2x) I 04:28:12 Cycling Tray before Verify... W 04:28:38 Waiting for device to become ready... I 04:28:52 Device Ready! I 04:28:54 Operation Started! I 04:28:54 Source Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 04:28:54 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 04:28:54 Image File: -==/\/[DISCOVERY IMAGE]\/\==- I 04:28:54 Image File Sectors: 4 173 824 (MODE1/2048) I 04:28:54 Image File Size: 8 547 991 552 bytes I 04:28:54 Image File Volume Identifier: DISCOVERY_IMAGE I 04:28:54 Image File File System(s): None I 04:28:54 Read Speed (Data/Audio): MAX / MAX I 04:28:54 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 04:28:54 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 04:28:54 Verifying Layer 0... (LBA: 0 - 2086911) I 04:37:54 Verifying Layer 1... (LBA: 2086912 - 4173823) I 04:46:57 Exporting Graph Data... I 04:46:57 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-18-MARS-2010_03-56_MKM-003-00_4x.ibg I 04:46:57 Export Successfully Completed! I 04:46:57 Operation Successfully Completed! - Duration: 00:17:58 I 04:46:57 Average Verify Rate: 7 743 KB/s (5.6x) - Maximum Verify Rate: 11 235 KB/s (8.1x) Scans: ATAPI iHAS120 6 7L0M (SATA)
-
Verbatim 8x DVD+R DL Full-face Printable [MKM-003-00] @ 2,4x Media Information: Optiarc DVD RW AD-7700S 1.03 (SATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4 173 824 Free Space: 8 547 991 552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2,4x; 4x; 6x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2 086 912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (ADIP - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (Last Recorded): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 3 324 KB/s (2,4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 5 540 KB/s (4x) Descriptor 3... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 8 310 KB/s (6x) Results: I 05:14:30 ImgBurn Version 2.5.1.0 started! I 05:14:30 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 05:14:30 Total Physical Memory: 8 387 704 KB - Available: 6 427 204 KB I 05:14:30 Initialising SPTI... I 05:14:30 Searching for SCSI / ATAPI devices... I 05:14:30 -> Drive 1 - Info: PIONEER DVD-RW DVR-115D 1.22 (E:) (ATA) I 05:14:30 -> Drive 2 - Info: PIONEER DVD-RW DVR-118L 1.02 (F:) (ATA) I 05:14:30 -> Drive 3 - Info: ATAPI iHAS120 6 7L0M (O:) (SATA) I 05:14:30 -> Drive 4 - Info: DVDFab Virtual Drive 1.0 (P:) (SCSI) I 05:14:30 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (R:) (SCSI) I 05:14:30 -> Drive 6 - Info: Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 05:14:30 -> Drive 7 - Info: PHANTOM DVD-RAM DVDR V10 88.0 (Q:) (SCSI) I 05:14:30 -> Drive 8 - Info: Optiarc DVD RW AD-7200A 1.09 (S:) (USB) I 05:14:30 Found 1 DVD±RW, 4 DVD±RW/RAMs, 2 BD-ROM/HD DVD-ROMs and 1 BD-RE! I 05:14:58 Operation Started! I 05:14:58 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 05:14:58 Source File Sectors: 4 173 824 (MODE1/2048) I 05:14:58 Source File Size: 8 547 991 552 bytes I 05:14:58 Source File Volume Identifier: DISCOVERY_IMAGE I 05:14:58 Source File File System(s): None I 05:14:58 Destination Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 05:14:58 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 05:14:58 Destination Media Sectors: 4 173 824 I 05:14:58 Write Mode: DVD I 05:14:58 Write Type: DAO I 05:14:58 Write Speed: 2,4x I 05:14:58 Link Size: Auto I 05:14:58 Lock Volume: Yes I 05:14:58 Test Mode: No I 05:14:58 OPC: Yes I 05:14:58 BURN-Proof: Enabled I 05:14:58 Write Speed Successfully Set! - Effective: 3 324 KB/s (2,4x) I 05:14:58 Book Type Setting: DVD-ROM I 05:15:08 Optimal L0 Data Zone Capacity: 2 086 912 I 05:15:08 Optimal L0 Data Zone Method: ECC Block Boundary I 05:15:09 Set L0 Data Zone Capacity Succeeded! I 05:15:10 Filling Buffer... (40 MB) I 05:15:10 Writing LeadIn... I 05:15:14 Writing Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 05:15:14 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 05:15:14 Writing Layer 0... (LBA: 0 - 2086911) I 05:37:55 Writing Layer 1... (LBA: 2086912 - 4173823) I 06:00:50 Synchronising Cache... I 06:00:51 Closing Track... I 06:01:05 Finalising Disc... I 06:02:17 Exporting Graph Data... I 06:02:17 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-14-MARS-2010_05-14_MKM-003-00_2,4x.ibg I 06:02:17 Export Successfully Completed! I 06:02:17 Operation Successfully Completed! - Duration: 00:47:18 I 06:02:17 Average Write Rate: 3 051 KB/s (2.2x) - Maximum Write Rate: 3 430 KB/s (2.5x) I 06:02:17 Cycling Tray before Verify... W 06:02:27 Waiting for device to become ready... I 06:02:40 Device Ready! I 06:02:42 Operation Started! I 06:02:42 Source Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 06:02:42 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 06:02:42 Image File: -==/\/[DISCOVERY IMAGE]\/\==- I 06:02:42 Image File Sectors: 4 173 824 (MODE1/2048) I 06:02:42 Image File Size: 8 547 991 552 bytes I 06:02:42 Image File Volume Identifier: DISCOVERY_IMAGE I 06:02:42 Image File File System(s): None I 06:02:42 Read Speed (Data/Audio): MAX / MAX I 06:02:42 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 06:02:42 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 06:02:42 Verifying Layer 0... (LBA: 0 - 2086911) I 06:11:42 Verifying Layer 1... (LBA: 2086912 - 4173823) I 06:20:45 Exporting Graph Data... I 06:20:45 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-14-MARS-2010_05-14_MKM-003-00_2,4x.ibg I 06:20:45 Export Successfully Completed! I 06:20:45 Operation Successfully Completed! - Duration: 00:17:58 I 06:20:45 Average Verify Rate: 7 743 KB/s (5.6x) - Maximum Verify Rate: 11 256 KB/s (8.1x) Scans: ATAPI iHAS120 6 7L0M (SATA)
-
Traxdata DVD+R DL 8.5GB Full-face Printable 8x [RITEK-S04-66] @ 6x Media Information: Optiarc DVD RW AD-7700S 1.03 (SATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4 173 824 Free Space: 8 547 991 552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2,4x; 4x; 6x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2 086 912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (ADIP - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (Last Recorded): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 3 324 KB/s (2,4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 5 540 KB/s (4x) Descriptor 3... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 8 310 KB/s (6x) Results: I 06:50:54 ImgBurn Version 2.5.1.0 started! I 06:50:54 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 06:50:54 Total Physical Memory: 8 387 704 KB - Available: 6 474 668 KB I 06:50:54 Initialising SPTI... I 06:50:54 Searching for SCSI / ATAPI devices... I 06:50:55 -> Drive 1 - Info: PIONEER DVD-RW DVR-115D 1.22 (E:) (ATA) I 06:50:55 -> Drive 2 - Info: PIONEER DVD-RW DVR-118L 1.02 (F:) (ATA) I 06:50:55 -> Drive 3 - Info: ATAPI iHAS120 6 7L0M (O:) (SATA) I 06:50:55 -> Drive 4 - Info: DVDFab Virtual Drive 1.0 (P:) (SCSI) I 06:50:55 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (R:) (SCSI) I 06:50:55 -> Drive 6 - Info: Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 06:50:55 -> Drive 7 - Info: PHANTOM DVD-RAM DVDR V10 88.0 (Q:) (SCSI) I 06:50:55 -> Drive 8 - Info: Optiarc DVD RW AD-7200A 1.09 (S:) (USB) I 06:50:55 Found 1 DVD±RW, 4 DVD±RW/RAMs, 2 BD-ROM/HD DVD-ROMs and 1 BD-RE! I 06:50:56 Operation Started! I 06:50:56 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 06:50:56 Source File Sectors: 4 173 824 (MODE1/2048) I 06:50:56 Source File Size: 8 547 991 552 bytes I 06:50:56 Source File Volume Identifier: DISCOVERY_IMAGE I 06:50:56 Source File File System(s): None I 06:50:56 Destination Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 06:50:56 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x) I 06:50:56 Destination Media Sectors: 4 173 824 I 06:50:56 Write Mode: DVD I 06:50:56 Write Type: DAO I 06:50:56 Write Speed: 6x I 06:50:56 Link Size: Auto I 06:50:56 Lock Volume: Yes I 06:50:56 Test Mode: No I 06:50:56 OPC: Yes I 06:50:56 BURN-Proof: Enabled I 06:50:56 Write Speed Successfully Set! - Effective: 8 310 KB/s (6x) I 06:50:56 Book Type Setting: DVD-ROM I 06:51:09 Optimal L0 Data Zone Capacity: 2 086 912 I 06:51:09 Optimal L0 Data Zone Method: ECC Block Boundary I 06:51:10 Set L0 Data Zone Capacity Succeeded! I 06:51:11 Filling Buffer... (40 MB) I 06:51:11 Writing LeadIn... I 06:51:15 Writing Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 06:51:15 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 06:51:15 Writing Layer 0... (LBA: 0 - 2086911) I 07:05:22 Writing Layer 1... (LBA: 2086912 - 4173823) I 07:18:42 Synchronising Cache... I 07:18:43 Closing Track... I 07:18:59 Finalising Disc... I 07:20:03 Exporting Graph Data... I 07:20:03 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-16-MARS-2010_06-50_RITEK-S04-66_6x.ibg I 07:20:03 Export Successfully Completed! I 07:20:03 Operation Successfully Completed! - Duration: 00:29:06 I 07:20:03 Average Write Rate: 5 071 KB/s (3.7x) - Maximum Write Rate: 8 377 KB/s (6.0x) I 07:20:03 Cycling Tray before Verify... W 07:20:12 Waiting for device to become ready... I 07:20:25 Device Ready! I 07:20:27 Operation Started! I 07:20:27 Source Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 07:20:27 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x) I 07:20:27 Image File: -==/\/[DISCOVERY IMAGE]\/\==- I 07:20:27 Image File Sectors: 4 173 824 (MODE1/2048) I 07:20:27 Image File Size: 8 547 991 552 bytes I 07:20:27 Image File Volume Identifier: DISCOVERY_IMAGE I 07:20:27 Image File File System(s): None I 07:20:27 Read Speed (Data/Audio): MAX / MAX I 07:20:27 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 07:20:27 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 07:20:27 Verifying Layer 0... (LBA: 0 - 2086911) I 07:29:28 Verifying Layer 1... (LBA: 2086912 - 4173823) I 07:38:31 Exporting Graph Data... I 07:38:31 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-16-MARS-2010_06-50_RITEK-S04-66_6x.ibg I 07:38:31 Export Successfully Completed! I 07:38:31 Operation Successfully Completed! - Duration: 00:17:58 I 07:38:31 Average Verify Rate: 7 743 KB/s (5.6x) - Maximum Verify Rate: 11 262 KB/s (8.1x) Scans: ATAPI iHAS120 6 7L0M (SATA)
-
Traxdata DVD+R DL 8.5GB Full-face Printable 8x [RITEK-S04-66] @ 4x Media Information: Optiarc DVD RW AD-7700S 1.03 (SATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4 173 824 Free Space: 8 547 991 552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2,4x; 4x; 6x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2 086 912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (ADIP - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (Last Recorded): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 3 324 KB/s (2,4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 5 540 KB/s (4x) Descriptor 3... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 8 310 KB/s (6x) Results: I 02:48:45 ImgBurn Version 2.5.1.0 started! I 02:48:45 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 02:48:45 Total Physical Memory: 8 387 704 KB - Available: 6 381 640 KB I 02:48:45 Initialising SPTI... I 02:48:45 Searching for SCSI / ATAPI devices... I 02:48:45 -> Drive 1 - Info: PIONEER DVD-RW DVR-115D 1.22 (E:) (ATA) I 02:48:45 -> Drive 2 - Info: PIONEER DVD-RW DVR-118L 1.02 (F:) (ATA) I 02:48:45 -> Drive 3 - Info: ATAPI iHAS120 6 7L0M (O:) (SATA) I 02:48:45 -> Drive 4 - Info: DVDFab Virtual Drive 1.0 (P:) (SCSI) I 02:48:45 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (R:) (SCSI) I 02:48:45 -> Drive 6 - Info: Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 02:48:45 -> Drive 7 - Info: PHANTOM DVD-RAM DVDR V10 88.0 (Q:) (SCSI) I 02:48:45 -> Drive 8 - Info: Optiarc DVD RW AD-7200A 1.09 (S:) (USB) I 02:48:45 Found 1 DVD±RW, 4 DVD±RW/RAMs, 2 BD-ROM/HD DVD-ROMs and 1 BD-RE! I 02:48:54 Operation Started! I 02:48:54 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 02:48:54 Source File Sectors: 4 173 824 (MODE1/2048) I 02:48:54 Source File Size: 8 547 991 552 bytes I 02:48:54 Source File Volume Identifier: DISCOVERY_IMAGE I 02:48:54 Source File File System(s): None I 02:48:54 Destination Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 02:48:54 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x) I 02:48:54 Destination Media Sectors: 4 173 824 I 02:48:54 Write Mode: DVD I 02:48:54 Write Type: DAO I 02:48:54 Write Speed: 4x I 02:48:54 Link Size: Auto I 02:48:54 Lock Volume: Yes I 02:48:54 Test Mode: No I 02:48:54 OPC: Yes I 02:48:55 BURN-Proof: Enabled I 02:48:55 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x) I 02:48:55 Book Type Setting: DVD-ROM I 02:49:04 Optimal L0 Data Zone Capacity: 2 086 912 I 02:49:04 Optimal L0 Data Zone Method: ECC Block Boundary I 02:49:06 Set L0 Data Zone Capacity Succeeded! I 02:49:07 Filling Buffer... (40 MB) I 02:49:07 Writing LeadIn... I 02:49:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 02:49:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 02:49:11 Writing Layer 0... (LBA: 0 - 2086911) I 03:04:43 Writing Layer 1... (LBA: 2086912 - 4173823) I 03:20:09 Synchronising Cache... I 03:20:10 Closing Track... W 03:20:11 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Power On, Reset, or Bus Device Reset Occurred W 03:20:11 Close Track Failed! - Reason: Power On, Reset, or Bus Device Reset Occurred W 03:20:11 Retrying (1 of 3)... W 03:20:11 Retry Failed - Reason: Logical Unit is in process of becoming ready - 1% W 03:20:11 Retrying (2 of 3)... W 03:20:11 Retry Failed - Reason: Logical Unit is in process of becoming ready - 1% W 03:20:11 Retrying (3 of 3)... W 03:20:11 Retry Failed - Reason: Logical Unit is in process of becoming ready - 1% W 03:20:15 Retrying (4)... W 03:20:15 Retry Failed - Reason: Logical Unit is in process of becoming ready - 17% W 03:20:17 Retrying (5)... W 03:20:17 Retry Failed - Reason: Logical Unit is in process of becoming ready - 21% I 03:20:18 Finalising Disc... W 03:20:19 Finalise Disc Failed! - Reason: Logical Unit is in process of becoming ready - 28% W 03:20:19 Retrying (1 of 3)... W 03:20:19 Retry Failed - Reason: Logical Unit is in process of becoming ready - 28% W 03:20:19 Retrying (2 of 3)... W 03:20:19 Retry Failed - Reason: Logical Unit is in process of becoming ready - 29% W 03:20:19 Retrying (3 of 3)... W 03:20:19 Retry Failed - Reason: Logical Unit is in process of becoming ready - 29% I 03:20:21 Exporting Graph Data... I 03:20:21 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-17-MARS-2010_02-48_RITEK-S04-66_4x.ibg I 03:20:21 Export Successfully Completed! I 03:20:21 Operation Successfully Completed! - Duration: 00:31:26 I 03:20:21 Average Write Rate: 4 495 KB/s (3.2x) - Maximum Write Rate: 5 728 KB/s (4.1x) I 03:20:21 Cycling Tray before Verify... W 03:20:30 Waiting for device to become ready... I 03:20:49 Device Ready! I 03:20:49 Operation Started! I 03:20:49 Source Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 03:20:49 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x) I 03:20:49 Image File: -==/\/[DISCOVERY IMAGE]\/\==- I 03:20:49 Image File Sectors: 4 173 824 (MODE1/2048) I 03:20:49 Image File Size: 8 547 991 552 bytes I 03:20:49 Image File Volume Identifier: DISCOVERY_IMAGE I 03:20:49 Image File File System(s): None I 03:20:49 Read Speed (Data/Audio): MAX / MAX I 03:20:49 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 03:20:49 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 03:20:49 Verifying Layer 0... (LBA: 0 - 2086911) I 03:42:15 Verifying Layer 1... (LBA: 2086912 - 4173823) I 04:03:46 Exporting Graph Data... I 04:03:46 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-17-MARS-2010_02-48_RITEK-S04-66_4x.ibg I 04:03:46 Export Successfully Completed! I 04:03:46 Operation Successfully Completed! - Duration: 00:42:52 I 04:03:46 Average Verify Rate: 3 245 KB/s (2.3x) - Maximum Verify Rate: 3 979 KB/s (2.9x) Scans: ATAPI iHAS120 6 7L0M (SATA)
-
Traxdata DVD+R DL 8.5GB Full-face Printable 8x [RITEK-S04-66] @ 2,4x Media Information: Optiarc DVD RW AD-7700S 1.03 (SATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4 173 824 Free Space: 8 547 991 552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 2,4x; 4x; 6x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2 086 912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (ADIP - L1): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Physical Format Information (Last Recorded): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196 608 Last Physical Sector of Data Area: 16 580 607 Last Physical Sector in Layer 0: 2 283 519 Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 3 324 KB/s (2,4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 5 540 KB/s (4x) Descriptor 3... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 4173824 (0x003FB000) -> RS: 8 310 KB/s (6x) - WS: 8 310 KB/s (6x) Results: I 02:54:20 ImgBurn Version 2.5.1.0 started! I 02:54:20 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 02:54:20 Total Physical Memory: 8 387 704 KB - Available: 6 357 324 KB I 02:54:20 Initialising SPTI... I 02:54:20 Searching for SCSI / ATAPI devices... I 02:54:20 -> Drive 1 - Info: PIONEER DVD-RW DVR-115D 1.22 (E:) (ATA) I 02:54:20 -> Drive 2 - Info: PIONEER DVD-RW DVR-118L 1.02 (F:) (ATA) I 02:54:20 -> Drive 3 - Info: ATAPI iHAS120 6 7L0M (O:) (SATA) I 02:54:20 -> Drive 4 - Info: DVDFab Virtual Drive 1.0 (P:) (SCSI) I 02:54:20 -> Drive 5 - Info: ELBY CLONEDRIVE 1.4 (R:) (SCSI) I 02:54:21 -> Drive 6 - Info: Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 02:54:21 -> Drive 7 - Info: PHANTOM DVD-RAM DVDR V10 88.0 (Q:) (SCSI) I 02:54:21 -> Drive 8 - Info: Optiarc DVD RW AD-7200A 1.09 (S:) (USB) I 02:54:21 Found 1 DVD±RW, 4 DVD±RW/RAMs, 2 BD-ROM/HD DVD-ROMs and 1 BD-RE! I 02:54:39 Operation Started! I 02:54:39 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 02:54:39 Source File Sectors: 4 173 824 (MODE1/2048) I 02:54:39 Source File Size: 8 547 991 552 bytes I 02:54:39 Source File Volume Identifier: DISCOVERY_IMAGE I 02:54:39 Source File File System(s): None I 02:54:39 Destination Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 02:54:39 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x) I 02:54:39 Destination Media Sectors: 4 173 824 I 02:54:39 Write Mode: DVD I 02:54:39 Write Type: DAO I 02:54:39 Write Speed: 2,4x I 02:54:39 Link Size: Auto I 02:54:39 Lock Volume: Yes I 02:54:39 Test Mode: No I 02:54:39 OPC: Yes I 02:54:39 BURN-Proof: Enabled I 02:54:39 Write Speed Successfully Set! - Effective: 3 324 KB/s (2,4x) I 02:54:39 Book Type Setting: DVD-ROM I 02:54:49 Optimal L0 Data Zone Capacity: 2 086 912 I 02:54:49 Optimal L0 Data Zone Method: ECC Block Boundary I 02:54:50 Set L0 Data Zone Capacity Succeeded! I 02:54:51 Filling Buffer... (40 MB) I 02:54:51 Writing LeadIn... I 02:54:55 Writing Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 02:54:55 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 02:54:55 Writing Layer 0... (LBA: 0 - 2086911) I 03:17:55 Writing Layer 1... (LBA: 2086912 - 4173823) I 03:40:53 Synchronising Cache... I 03:40:54 Closing Track... I 03:41:08 Finalising Disc... I 03:42:22 Exporting Graph Data... I 03:42:22 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-7-MARS-2010_02-54_RITEK-S04-66_2,4x.ibg I 03:42:22 Export Successfully Completed! I 03:42:22 Operation Successfully Completed! - Duration: 00:47:42 I 03:42:22 Average Write Rate: 3 027 KB/s (2.2x) - Maximum Write Rate: 3 592 KB/s (2.6x) I 03:42:22 Cycling Tray before Verify... W 03:42:39 Waiting for device to become ready... I 03:42:50 Device Ready! I 03:42:52 Operation Started! I 03:42:52 Source Device: [5:0:0] Optiarc DVD RW AD-7700S 1.03 (N:) (SATA) I 03:42:52 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 2,4x; 4x; 6x) I 03:42:52 Image File: -==/\/[DISCOVERY IMAGE]\/\==- I 03:42:52 Image File Sectors: 4 173 824 (MODE1/2048) I 03:42:52 Image File Size: 8 547 991 552 bytes I 03:42:52 Image File Volume Identifier: DISCOVERY_IMAGE I 03:42:52 Image File File System(s): None I 03:42:52 Read Speed (Data/Audio): MAX / MAX I 03:42:52 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4173823) I 03:42:52 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823) I 03:42:52 Verifying Layer 0... (LBA: 0 - 2086911) I 03:51:52 Verifying Layer 1... (LBA: 2086912 - 4173823) I 04:00:56 Exporting Graph Data... I 04:00:56 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\DISCOVERY_IMAGE_Optiarc_DVD_RW_AD-7700S_1.03_DEN-7-MARS-2010_02-54_RITEK-S04-66_2,4x.ibg I 04:00:56 Export Successfully Completed! I 04:00:56 Operation Successfully Completed! - Duration: 00:17:58 I 04:00:56 Average Verify Rate: 7 743 KB/s (5.6x) - Maximum Verify Rate: 11 262 KB/s (8.1x) Scans: ATAPI iHAS120 6 7L0M (SATA)