dontasciime
-
Posts
5,151 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by dontasciime
-
-
I bought a Navman Pin 570 it's a pocket PC as well.
OK so then i went onto ebay and bought an SD wifi card.
Having a spot of bother with the wifi, dunno if its down to router/sd wifi card/ the drivers and utility or the Navman pin 570.
So i have emailed all companies involved with my findings and questions.
I asked Navman this
How would i go about updating firmware in my new navman pin 570. (as i cannot find firmware on your site)
Also I bought a spectrec SD wifi card and I am having some issues, can you tell me which brands of sd wifi card can be used on this navman 570 thanks..
Their reply
Dear Kevin,You can use any SD Wifi card on the PiN570, as long as it is compatible with this model.
We did not release any firmware updates for the PiN570.
F'ing useless response.
It's a bit like me saying to a Tennant, you can paint your door any colour you like as long as it's brown.
Also they do have firmware for this device as i know other people who contacted their support over a bug, whereby it would crash when the gps map was zoomed and the reply they got was try this new firmware.
I think this guy who replied just found the receptionist's computer vacant and replied
-
mine are not much better
worse than the ricoh ones i have done
hope the other 59 are not like that
-
Mine arrived this morning, had been out to get lost planet for 360, when i came back could see posty van outside my door, had to fight this horrible force gale to get there in time.
Strange compared to UK verbs, their like girly lavender coloured.
First one burned ok, just gonna check quality now compared to UK ones.
-
1X writing
use 2.4x if writer says only 1x then it looks like they are incompatible with your writer, check manufacturers website or rpc1.org for the latest firmware for your writer.(did not look b4 typing) so you may already have latest firmware.
may be off the mark here, as there maybe 1x dl+ not seen any, 1x dl+ seems out of spec to me though.
Edit ... BTW when i suggested lowering burn speed i assumed you were trying to write them at 8X, I meant try writing them at 2.4
-
try lowering the speed on them, don't think your gonna have much luck with those disc's with your particular drive, maybe its a completely duff batch of disc's, rather than just duff ones, if you were happy with the ridisc maybe get some more(little or no quality control on them or anything but verbs at the minute), or invest a little more money and be pretty much guaranteed a 100% burn with verbatim dl+
-
yeah but they got concorde out of retirement for you
-
cheers
-
quality will not improve on + to - makes no difference.
When you record on ya cam set it to highest quality recording.
I don't have a mac so software side of it i ain't got clue.
Cannot see how imgburn is going to help you achieve what you want
-
that who delivered them, not parcel farce or even royal mail
-
Yeah your downloading the wrong type of file, you need to download THIS
-
or if your using usb2 use 4x or 6x MAX 8x (12x and 16x work for me, not recommended though)
if your using usb1 use lowest speed or buy a usb2 pci card etc
-
-
-
you Say you got them today, what day did you order them and which company delivered, thanks
i think i ordered mine on friday night, and they were shipped on the SAT
-
me2
edit you can flash it to 2510A which does both
-
put disc in then copy all of log, -r and a + r
-
I ended up buying the drive for a laugh, just installed it into sumvision caddy, turns out to be a Benq DW1670
No solidburn,overspeed, or quality scans
auto booktype dvd-rom on dvd+ and Dl+
test write enable/disable
Can set +rw to dl+ dvd-r etc (lol)
just finished burning my first disc on it, A CMC AM3, (don,t laugh aint had one fail to playback) and no the data is still readable 1yr on from previous burns.
and then scanned on 1670 (not quite right) only choices were CAV so choose 8x CAV
same disc scanned on liteon 160P6S
-
Scared em off with this load of balls
-
I don't bother to verify verbs, I know it is wise to verify but i verify each disc differently, i play it in what it was designed for if it plays and the movie plays all the way to end without a hitch then thats verified to me, I have ran off a long line of backups and not verified them at all, as writing appeared normal yeah i know famous last words when none will play back, not had 1 yet though.
I would try the ones you have written so far in ya 360 as writing seemed ok to me.
-
you not got a .dvd file to go with ISO
you may get away with setting layer break manually to 1913760 in imgburn
or create a new text document
then paste this in
LayerBreak=1913760
name_of_your_iso_here.iso
then goto file and Save As
where it asks for filename type this including speech marks also make sure you type the name of the ISO in your case cod3 (in the same case as ISO filename case)
"cod3.dvd"
then click on save
you should now have something you could right click on and choose burn with imgburn.
also the duration time of burn should be 41.51 or 42.51 or there abouts @2.4, though i can see 2.5 max in your log, so maybe ignore what i typed about duration, however check to see if there is a newer firmware for your nec.
-
post a log, or say what make of dvd drive youhave etc, brand of dvd-rw or -r etc.
you got img extension registered in imgburn.
click on defaults in imgburn.
-
Matches, Petrol and oveglove
-
they just keep on doing it as well, traxdata +r have RW on each disc, i have also seen these on many other manufacturers discs, tip disc over to writing side you will see its kinda grey RW or purple worm @(write once read many) or in the case of the poorer media worn, Write Once Read Never
-
more importantly will be the source material, vhs or cam would need some passes and time when converting to Avi etc
Verbatim DVD+R DL's Shipping deal
in Chat
Posted · Edited by dontasciime
It's a firmware that burns has burned all uk verbs(65 of them) id MKM with 98-99% quality it is a hacked firmware but i do not use the hacked features, in fact i forgotten what the benefit of that firmware is.
The disc above has just verified ok against the image....
will try another then try one in a diff burner, will try it in my new benq 1670 as well...