dontasciime

default settings then udf 2.5/ 2.6

Seems a silly thing to say. I 13:16:25 ImgBurn Version 2.5.0.0 started! I 13:16:25 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 13:16:25 Total Physical Memory: 1,048,048 KB - Available: 668,868 KB W 13:16:25 Drive C:\ (FAT32) does not support single files > 4 GB in size. W 13:16:25 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 13:16:25 SPTD can have a detrimental effect on drive performance. I 13:16:25 Initialising SPTI... I 13:16:25 Searching for SCSI / ATAPI devices... I 13:16:25 Found 1 DVD-ROM and 1 DVD

Could you estimate when this feature may be added? Thanks When it's ready.

Or use gpedit.msc and Enable Turn off Autoplay

1.30 is out now to download

One of my computers has done it before a few times and clicking on desktop brought it to front

Happy Birthday

Pioneers are good for 360 when used with Verbatim 2.4x MKM-001-00

Is this that Indian guy again from the other days post on Ritek ? If so, It's not 1858 anymore you know. Btw the first log from user[eunero] was not that of an xbox 360 game hence why the Layerbreak was not set to 1913760. The Identifier does not match any 360 game mastered yet and is the wrong size for a 360 game [7,201,423,360 bytes] an xbox 360 game should be [7,835,492,352 bytes] You,re no Columbo are you ? "Just one more thing"

Don't use raid drivers... TBH how you have not seen the same issues with the other burning programs is maybe a fluke* . Your Pioneer might be broken like one of my pioneer 109's when it randomly started to produce errors where there was no way of saying what was actually causing it. Don't use ATI driver for sata or raid use standard dual channel pci ide controller(with SATA in bios set to IDE mode (not AUTO). Borrow another SATA drive PIO or different make to see if yours is faulty ( I asume you have tried it on all 6 sata ports). Unless you are using RW you have no way of knowing whether the disc's you had success with in ALC or any other program would have also not been successful in ImgBurn and also the opposite how do you know the ones in ImgBurn failed would not have also failed in Alc or clone etc. *Try Incremental in ImgBurn write settings

Why use ImgBurn then > ? When you say fresh installs... you mean using only windows drivers (standard) or windows drivers provided by AMD built in to service pack 2 or 3. XP....try SP1 and install motherboard chipset driver but not the storage driver /Ide etc. Then if still the same after ensuring Bios is latest as mentioned above (you could also try AHCI) I would personally just leave sata set to emulate IDE mode as I only ever have the above kind of bother with AHCI and SATA opticals (but it might work for you) I would install XP (SP1) then make a Ghost image...after ghost image is made (download as many Amd chipset drivers for your motherboard as you can find do same for storage driver for your motherboard if it is a separate driver ) then Install motherboard chipset drivers (minus) the Amd Sata/Ide driver and just use standard Ms driver for sata/ide If no good then take your system back to just before you installed chipset driver BY putting the ghost image back in and try a different version motherboard chipset driver hopefully you will find a revision of the drivers to work. Assuming the disc's are genuine the sata cables are not damaged at right angle etc.. Still no good change your motherboard, buy a sata to usb kit. buy a Jou-Jye ST-2512SUES 5.25" External Aluminum Box, SATA to e-SATA/USB 2.0 and stick pioneer in external Stick SPTI back on as I/O as well as choosing a correct (supported) speed for burning. You would be better choosing 8x and up with modern disc's and the writer you have I 12:36:54 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 6x, 8x, 12x, 16x, 20x) I 14:06:39 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)

Just your media...If after getting Verbs you have no joy then try cleaning lens.

try using just Windows drivers for sata eg if connected to nvidia - controller (say no to ide storage driver) or try updating controller driver ... Whilst you are at it change the SATA cable (I had a few sammys giving LBA out of range errors) also try different sata port ...

Surprising .Maybe get a cheapo dvd player like Yamada / Umax . Not sure if those are available at your location. You got a top Brand dvd player ?

Thanks Cynthia. Out of spec a little but plenty readable for at least a few months if movie for kids dvd player.

What did the scan look like on that burn Q% wise ?

Firstly: Sorry to hear about your small thing. Secondly: If he edited first post I would need to keep a manual eye on the thread (eg no notification)which I would prefer not to have to do. Also if I were to click show new posts it would not show this thread unless a genuine new post had been made (I pressume). I quite like reading the banter/diary of the progress so far and Input from other users. If it's tedious to read why not just wait for the film.

#ImgBurn causes no conflicts#

can you not extract ISO rebuild etc

Happy Birthday have a lovely day. Presents below.

Have you used this program before then ?

Or add file/s option then browse for the folder you have piccys and other file types in within ImgBurn then when window opens up to show you files right click then / sort them by type then click 1st jpg/bmp/png piccys find last one hold shift / add/open

don't specify layerbreak allow .dvd to supply and don't mess with settings set em all back to default and don't ignore Author he knows his program best. Post a log as suggested

If you burn and it says 100% you set it to dvd-rom and you verified it and it passed 100% ... don't try again you will be wasting your time . use the time you saved to search google to look for an xbox related forum as to why CDIMAGE 2.45 don't work