chewy
-
Posts
1,400 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by chewy
-
-
The joke police do not know who I am and they have already said they do not have any leads.
Interpol's impersonating a comedian division is keeping a close eye on you and loco tho.
-
unless
we are talking pal dvd from flick(the default) and you are in ntsc land
mediainfo will verify
-
so I suppose there can't be a problem with this?
things are never that simple, I have had lots of problematic burns from age/crap media/old burners/wornout players and never seen your problem
it's a simple test, try on another standalone
-
sounds like the panasonic needs service or is just worn out
verify with another standalone player, preferably one that's newer
-
What is this Jacket_P dir and is it necessary for the burned DVD to function properly?
It takes special players to even use, pops a picture up on the screen during pause or stop
not necessary, just another gimmick
-
the pioneer 112 and 115 are good ide burners?
for cheap here in america and ide
free shipping
deals change every day or two
http://www.newegg.com/Product/Product.aspx...N82E16827151151
26$ to the door
-
see my edit above
do you need any reccomendations on good dvd burners?
-
Found 1 DVD-ROM/CD-RW!
that's what I guessed might be wrong, you have a combo drive that just reads dvd's but won't write them
-
there is already a blank dvd inside
what is your drive? and what kind of blank?
-
http://forum.rpc1.org/dl_firmware.php?download_id=309
Oct 06, 2002
that was one of the first dvd writers
might help to load the latest firmware
1.72
-
you can use the filter driver load order tool
under tools
use clipboard button
paste into reply
-
-
JMB36X RAID Driver Release Note
R1.17.31WHQL (R1.17.31.00 - 12/10/07')
seems they are releasing a new driver every month trying to fix issues
-
Onboard SATA/IDE Ctrl Mode (GIGABYTE SATA2 Chip)
In bios is this set for ide?
the purple sata connectors come off this same jmicron chipset? also runs the pata that your burner is connected to
-
gigabyte sata 2 has always been jmicron before, probably same crap all over again
what's the driver version and date from device manager?
have you checked the burner in another computer with standard southbridge chipset support?
-
LITE-ON DVDRW LH-20A1P KL0N (H:) (SCSI)
that's the ide/pata model right?
-
http://www.videohelp.com/dvdmedia?&next=50
what blanks are you using when it gives you that message?
-
verbatim dual layer(2.4x) is the "only" one to use
I doubt that your burner does that good a job even with them?
-
I found one date for that laptop drive's firmware, it was feb/2005
burning dual layer with a new drive is tricky, burning that brand of disk is almost impossible(consistently)
-
So instead of having your dvd burners share a cable, you have them share with your hard drives?
I never had much luck with anything sharing, but dvd burners that were never used at the same time.
My hard drives and dvd burners are always being used at the same time and they never share a cable.
-
see the faq's for dma
if that's fine for the new burner then try moving it to the end of the cable as stand alone master and put it on the shortest power lead all by itself
you are using a new 80 conductor cable???
-
extract with winrar(google) into a folder on your desktop, make sure drive is empty and boot into safe mode and execute the flash
might be a good idea to stay with 8X media if you can find it? Of course if 16x verbatim worked before it should still work if you burn slow
-
OEM Liteon SOSW-852S
the firmwares are all over 2 years old, pretty lucky to have the drive last that long?
http://codeguys.rpc1.org/firmwares.html#SOSW-852S
according to this page PFS3 was the latest
dates are sure confusing tho
-
System ASPI installation is corrupted
since you are using usb that might be critical?
LuK would know better than anyone
killaspi? of course most of us don't have any system aspi at all
do filter drivers impact usb?
Real screwy log
in ImgBurn Support
Posted
copied from digital digest