dontasciime

where is layerbreak info seems to be missing from the log. you need to set up the layerbreak Can you not use xbc2.5 to create backup and burn from the .dvd file

try removing the padus one pfc.sys then look in registry for key below and delete it HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318} then reboot Maybe see if there is update to the sata drivers for nf3 or maybe just use the standard MS ones instead.

I thought ini was only for command line and for it not to touch registry. oh well lal [edit 15.47] I'm sure I should have known that as there have been a couple of posts about it.

Dodgy disc's bad batch maybe You updated the firmware on the drive recently ? or did it come with SB01. Maybe check IDE cable is secure or replace with 80 if on 40 or just try replacing IDE cable. check 4 pin power whilst there. Are you using a 3rd party IDE controller ? If so see if there are any driver updates. Maybe check the other software you have installed like Incd or anything similar. post the filter driver load order from tools menu. Strange error for DAO mode where pma is not supposed to be touched [edit] what size Psu have you got in that machine and have you got another machine you could try that writer in ? Burn them at their rated speed as well.

how did you get INI file then ?

Try Magic Disc 2.5 (free) and then select decompress then point it to uif and let it convert it to ISO. Ideally though to speed up things make sure that the source and destination drives are 2 different hard drives.

try setting the booktype to dvd-rom if your burner supports it as to the other issue you could goto tools / settings / write tab options and untick lock drive and then try to format but put it back afterwards as there will be a better solution somewhere somehow. If you have media center player open close it. [EDIT] Could you try this first in media player 9/10/11 whichever version your using untick rip cd when inserted

http://en.wikipedia.org/wiki/Direct_memory_access http://en.wikipedia.org/wiki/UDMA

Never use the Cli mode so maybe someone else that uses it can comment

Don't delete the folder created in (1) then Which settings did you back up for it not to remember , you choose custom for graph data why would IB know that

B circle of life

or post a picture of your chair

Get your 80 wire cable and connect it but this would only benefit for faster speeds on single layer and to achieve udma 4 if your drive supports it.

its about time ms released sp3 with all sata drivers to date to avoid f6 specify additional.

That was a good year 1976 "we had an Indian Summer" I was 9 and full of energy. Yeah I know, now I am just full of shit

Standby/hiber/restart they are all there in 2.3.2.0 Never ever used em, handy for some though.

I should imagine you will lose quality putting it on dvd with dvd playback mpeg2 being 10.08mbps or is it 9.8mbps, lower than the bitrate of hd-dvd.

AND...make the levitate... You mean like this Stupid me "Levitate"

You can switch computers off ?

reinstall your operating system then it's simple. Unless your writer has had it and only seems to like incremental writing.

windows will show 44 bytes

why are you choosing 1x burn them at their rated speed of 8x What is the uknown device btw Unless that is a re-writable disc How can you say that.

put a dvd in the drive

see if there is a driver update to the sata controller your using.

ImgBurn does not replace that program for read only write. In other words ImgBurn cannot read protected dvd's