mmalves

Look at LUK's screenshot above again

Please read my signature Oh, and you burner may produce better burns at 4x or 6x.

It burned and verified fine, so, provided that the source image isn't defective, then the problem could be with your x360 drive/console, and we can't help with that.

We still don't know since that log you've posted is incomplete.

Then you already know what's most likely the cause of the problem. Also please post the whole log from that burn session (look in ImgBurn's Help menu).

Nope.

You can find previous logs in ImgBurn's Help menu

You can try all you want but it still boils down to your burner being unable to write the media you're using. Can you not try some Verbatim blanks to see if it isn't a burner problem?

Try burning at 4x on the laptop and it may result in a better burn. Also leave Verify enabled as that's what ensures if it was a good burn or not.

Use the LG tab, and if you get an error (e.g. Invalid something) then it means the drive doesn't support booktyping, although it should automatically booktype DVD+R DL media by itself.

I would get one of the newer Pioneer or Optiarc burners.

Does that burner support writing dual-layer media? With ImgBurn in Write mode, right-click the burner's name and choose Capabilities: is there a check next to DVD+R DL under Write Capabilities?

Try a lens cleaning disc on that burner, and if it doesn't help, you should start looking for an external burner

Did you not notice the Enable SPTI for All Users option in the installer?

Try a lens cleaning disc on that burner. If that doesn't help then you may want to try with the 8x Verbatim blanks, but at this point I would start looking for a new burner Another option would be to force flash of this SC01 firmware, or even crossflash that burner to its real SH-S223Q firmware, but notice that both these options will void your warranty.

The regionfree stuff has nothing to do with this problem. Please read this -> http://forum.imgburn.com/index.php?showtopic=8000 If your friend doesn't have exactly the same burner model and firmware then it isn't a fair comparison, is it? //edit too slow again

All seems OK, so it shouldn't hang again

The booktype command has to be supported by the burner's firmware, and your burner doesn't support it. It should automatically booktype DVD+R DL media to DVD-ROM by itself though.

The newer models by Optiarc are also very good. Are you looking at online stores? There are a few listed in this thread -> http://forum.imgburn.com/index.php?showtopic=8000

Uncheck Test Mode and it should work

The one on FirmwareHQ.com is A106, not 1.06, so it's probably incompatible with your burner.

The only way to get around it is by renaming the files in the order you want them to play: 001-original_name.mp3 002-another_song.mp3 etc. (notice the numbering )

Are you using the Create CUE File feature or Build mode?

Try closing ImgBurn, rebooting Windows or turn off the computer. Look for updated drivers for your motherboard's chipset or IDE controller (use SIW to find out which model you have). Also please post your Filter Driver Load Order (look in ImgBurn's Tools menu).

Just to be sure: this firmware update doesn't work?