ianymaty

You can also update ImgBurn to current version: 2.5.1.0

Update the firmware from here and try again

Try to update the firmware from here Try cleaning your drive. Try the other speeds available 4x 8x and othe brand of disc

You don't have to throw the whole computer... The last firwmare update is way back in 4th May, 2006 and that is already installed in your drive. If the Verbatim DL 2,4x don't work, you should start looking for a new burner, 'couse your is way old.

Oh, did you try to switch the connections to connect the bad drive to that port where the other drive works? Try the drive in another computer if you can...

Did you let it all alone and nothing happened? I'm running out of options... You're on your own now.

By media code that is written in the log: Disc ID: YUDEN000-T02-00 If you have searched the forum or Google you have found it by yourself. Look here.

Every modern drive is boot capable. In new BIOS versions there are two settings that you can change: Boot order and Boot priority. Maybe there lays your problem. You could try this: Eliminate all HDDs and CD/DVD drives that you have connected to mainboard leaving just the one you want. Set the boot priority and boot order to see that drive as first and only one boot source and than and try boot from it. Make sure you have a bootable CD/DVD disc.

Read this http://forum.imgburn.com/index.php?showtopic=8000

The burning speed are set the same on internal like on external? Maybe update controller drivers wuould help.

That's becouse DVDFlick comes with its own ImgBurn bundled. Save the finished files as VIDEO_TS folder first, not direct burn. In this way you can make what Cynthia sugested with your problem. Use Bild mode to make the final disc.

You have run it As Administrator, did you? Also, did you read the info on the site where it says... If it is in an OEM computer try on their site, maybe they also provide one.

Your media is actually 8x rated but your drive can only burn them at 2,4x; 4x Your drive is old and you use new media. Try the latest firmware upgrade of the burner See here Also you could try cleaning the lens with a lens cleaning disc. Or buy media rated 2,4x; 4x.

You see, not only the media is the problem. It's a combination of things like what media in what burner with what firmware and maybe other like chipset drivers correctly installed working all together. Now, from the many firmware updates it has, seems it is a burner with problems, and now it is geting old, latest update beeing 1st August, 2008. If you can, try it in another computer see how it is performing. Other than that, invest in a new one.

What is the real problem? If you think to the See the end of the line... don't bother, the only speed it can burn is 4x regarding of what u select. Since there is no official firmware update, if feel confortable you can crossflash it to GSA-H55L 1.06 Beware that it will void the warranty!

Update to latest Firmware Do a lens cleaning, try other burning speeds supported, use decent media like Verbatim or Taiyo Yuden

ImgBurn does not copy (rip) anything that has a form of encryption that prevents the copy action of a copyrighted material and it will not try to circumvert them. It's your problem how you get your source files. Google it, here you will get no help. Once you have sorted the problem and have your files on hard drive, try playing them with a software player. Now, follow this Guide to put it on disc with ImgBurn. If you have problems regarding the burn session, post a log of that burn.

Try with a new data cable. If it is PATA use a short 80 pins ribbon, not a round one cable. And don't mess up the bios settings. Put them on default and change only what you are sure and safe to change.

You can make it Bootable again. Read this and do the work for make it. How to make Vista Bootable Sure, you can use ImgBurn to burn the ISO to disc, in place of what is sugested there.

When I said that I was reffering to one of the ISO's downloaded from MSDN, not what you created. I doubt that none of them are Bootable.

You got lucky as it was not their problem.

Most recommendation I see on the forum are for the Optiarc burners Also, a good thing is to browse the General\Drive section of the Forum to see some tests how the drives performe on different media at different speeds

Since newest firmware is from 2005 the burner is kind of old now... I think you should follow mmalves advice and look for a new burner

OP said it comes at the final stage of DVDFlick when calling ImgBurn to do the burn.

Most probably the ISO's are Bootable and the problem is in VM settings. To see if it is Bootable, just load the ISO to ImgBurn in Write mode and look at File Sys: It should say: ISO9660 (Bootable) if it is.